AKD5366(2007) 데이터 시트보기 (PDF) - Asahi Kasei Microdevices

부품명

상세내역

일치하는 목록

AKD5366
(Rev.:2007)

AK5366 Evaluation Board Rev.A

Asahi Kasei Microdevices 

[AKD5366]

(2) Master Mode

(2-1) A/D evaluation using DIT function of AK4103

PORT1 (DIT) is used. DIT generates audio bi-phase signal from received data and which is output through

optical connector (TOTX176). It is possible to connect AKM’s D/A converter evaluation boards on the

digital-amplifier which equips DIR input. Nothing should be connected to PORT2 (ROM). In case of using

external clock through a BNC connector (J13), select EXT on JP8 (CLK) and short JP6 (XTE) and open JP9

(EXT).

JP2

JP4

JP6

JP8

JP9

LRCK

BICK

XTE

CLK

EXT

Other jumper pins set up

1. JP1 (GND) : Analog ground and Digital ground

OPEN : Separated.

SHORT : Common. (The connector “DGND” can be open.) <Default>

2. JP3 (M/S) : Select Master/Slave mode for AK5366

SLAVE : Slave mode <Default>

MASTER : Master mode

3. JP5 (TVDD) : Select DVDD for AK5366

REG : Supply from regulator

TVDD : Supply from TVDD connector <Default>

4. JP7 (MCLK) : MCLK Frequency for 74HC4040

256 : MCLK is 256fs. (=12.288MHz@fs=48kHz) <Default>

512 : MCLK is 512fs. (=24.576MHz@fs=48kHz)

<KM073601>

-3-

2007/04

Share Link: