M52334FP 데이터 시트보기 (PDF) - Renesas Electronics
부품명
상세내역
일치하는 목록
M52334FP Datasheet PDF : 19 Pages
| |||
M52334FP
The Note in The System Setup
M52234FP has 2 power supply pins of VCC (pin 7) and Vreg. OUT (pin 4). Pin 7 is for AFT output, RF AGC output
circuits and 5 V regulated power supply circuit and pin 4 is for the other circuit blocks. In case M52334FP is used
together with other ICs like VIF operating at more than 5 V, the same supply voltage as that of connected ICs is applied
to VCC and Vreg. OUT is opened. The other circuit blocks, connected to Verg. OUT are powered by internal 5 V
regulated power supply.
In case the connecting ICs are operated at 5 V, 5 V is supplied to both VCC and Vreg. OUT.
Input Signal
SG No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Signals (50 Ω Termination)
f0 = 45.75 MHz AM 20 kHz 77.8% 90 dBµ
f0 = 45.75 MHz 90 dBµ CW
f1 = 45.75 MHz 90 dBµ CW (Mixed signal)
f2 = Frequency variable 70 dBµ CW (Mixed signal)
f0 = 45.75 MHz AM 20 kHz 77.8% level variable
f0 = 45.75 MHz AM 20 kHz 14.0% level variable
f0 = 45.75 MHz 80 dBµ CW
f0 = 45.75 MHz 110 dBµ CW
f0 = 45.75 MHz CW level variable
f0 = Variable AM 20 kHz 77.8% 90dBµ
f0 = Variable 90 dBµ CW
f1 = 45.75 MHz 90 dBµ CW (Mixed signal)
f2 = 42.17 MHz 80 dBµ CW (Mixed signal)
f3 = 41.25 MHz 80 dBµ CW (Mixed signal)
f0 = 45.75 MHz 87.5%
TV modulation ten-step waveform
Sync tip level 90 dBµ
f1 = 41.25 MHz 103 dBµ CW
f1 = 41.25 MHz 70 dBµ CW
f1 = 45.75 MHz 90 dBµ CW (Mixed signal)
f2 = 41.25 MHz 70 dBµ CW (Mixed signal)
f0 = 4.5 MHz 90 dBµ FM 400 Hz ± 25 kHz dev
f0 = 4.5 MHz FM 400 Hz ± 25 kHz dev level variable
f0 = 4.5 MHz 90 dBµ AM400Hz 30%
f0 = 4.5 MHz 90 dBµ CW
Rev.2.00 Jun 14, 2006 page 8 of 18
Share Link: 