EBE21FD4AGFN 데이터 시트보기 (PDF) - Elpida Memory, Inc

부품명

상세내역

일치하는 목록

EBE21FD4AGFN

2GB Fully Buffered DIMM

Elpida Memory, Inc 

EBE21FD4AGFD, EBE21FD4AGFN

Advanced Memory Buffer Overview

The Advanced Memory Buffer (AMB) reference design complies with the FB-DIMM Architecture and Protocol

Specification. It supports DDR2 SDRAM main memory. The AMB allows buffering of memory traffic to support large

memory capacities. All memory control for the DRAM resides in the host, including memory request initiation, timing,

refresh, scrubbing, sparing, configuration access, and power management. The AMB interface is responsible for

handling FB-DIMM channel and memory requests to and from the local DIMM and for forwarding requests to other

DIMMs on the FB-DIMM channel.

The FB-DIMM provides a high memory bandwidth, large capacity channel solution that has a narrow host interface.

FB-DIMMs use commodity DRAMs isolated from the channel behind a buffer on the DIMM. The memory capacity is

288 devices per channel and total memory capacity scales with DRAM bit density.

The AMB is the buffer that isolates the DRAMs from the channel.

Advanced Memory Buffer Functionality

The AMB will perform the following FB-DIMM channel functions.

• Supports channel initialization procedures as defined in the initialization chapter of the FB-DIMM Architecture and

Protocol Specification to align the clocks and the frame boundaries, verify channel connectivity, and identify AMB

DIMM position.

• Supports the forwarding of southbound and northbound frames, servicing requests directed to a specific AMB or

DIMM, as defined in the protocol chapter, and merging the return data into the northbound frames.

• If the AMB resides on the last DIMM in the channel, the AMB initializes northbound frames.

• Detects errors on the channel and reports them to the host memory controller.

• Support the FB-DIMM configuration register set as defined in the register chapters.

• Acts as DRAM memory buffer for all read, write, and configuration accesses addressed to the DIMM.

• Provides a read buffer FIFO and a write buffer FIFO.

• Supports an SMBus protocol interface for access to the AMB configuration registers.

• Provides logic to support MemBIST and IBIST design for test functions.

• Provides a register interface for the thermal sensor and status indicator.

• Functions as a repeater to extend the maximum length of FB-DIMM links.

Preliminary Data Sheet E0868E30 (Ver. 3.0)

3

Share Link: