050-624-5526899 데이터 시트보기 (PDF) - ITT Cannon

부품명

상세내역

일치하는 목록

050-624-5526899

RF Coaxial Connectors

ITT Cannon  

RF Coaxial Connectors

Assembly Instructions

AI-703 SMA Straight Connectors, Captive Contact, Crimp Type for Braided Cable

HEAT SHRINKABLE

TUBING

CRIMP

FERRULE

RETAINING

NUT

REAR BODY

CENTER

CONTACT

FRONT BODY

1. Strip cable to dimensions shown. Do not nick outer or inner conductors. Tin inner conductor.

A

13,46 (.530)

B

7,11 (.280)

C

3,56 (.140)

2. Place shrink tubing, crimp ferrule and retaining nut on cable. Flare the cable outer conductor as

shown.

3. Insert cable dielectric into rear body until it bottoms firmly against insulator as shown.

4. Place a 0,38 (.015) dia x 2,50 ± 0,51 (.100 ± .020) long solder wire into solder hole of the center

contact. Heat center contact and push it over cable inner conductor until it bottoms against

insulator as shown. Remove excess solder if necessary.

Assy Insts

5. Insert rear body into front body. Engage threads of retaining nut to front body and hand tighten

retaining nut. Hold front body firmly with a 7,93 (.312) hex. torque wrench and torque it to 1,13-1,69

Nm (10-15 in. lbs.). by turning retaining nut only.

6. Slide crimp ferrule over flared portion of cable outer conductor. Crimp outer sleeve in place as

shown. Push cable firmly toward connector when crimping. Trim and remove any excess outer

conductor strands if necessary. Position shrink tubing over crimp sleeve apply indirect heat to

shrink tubing down.

Cable Type

RG142/U

RG316/U

RD316

Cable Code

9142

9188

9875

Die Size

5,41 (.213)

3,25 (.128)

3,84 (.151)

Dimensions are shown in mm (inch)

Dimensions subject to change 125

Share Link: