datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

P/N + 설명 + 콘텐츠 검색

검색어 :
부품명(s) : NAS-XXX
ETC1
Unspecified
상세내역 : SEMI-Precision POWER Wirewound RESISTOR

[Wirewound AND FILM TECHNOLOGIES DIVISION]

SEMI-Precision POWER Wirewound RESISTOR

• 1/4 watt to 10 watts
• ±5%, ±3%, ±1%, ±.5% tolerance
• 0.1 ohm to 175K ohms
• Resistance wire TCR ±20 ppm/°C

Vishay
Vishay Semiconductors
상세내역 : Molded Precision Wirewound Resistors

High stability and low temperature coefficient are the main features of the Precision Wirewound Resistors type RMB RMBS models just as maintenance parts. Their performances can be compared with those of the best film Resistors but they have in addition a greater power rating. RMBS styles meet the more severe requirements of NF C 83-210 (all RMBS styles are approved) and characteristic U of MIL-R-26 E (approximate size of RW 70 and 79 Resistors) specifications. The two models RMB and RMBS have a similar construction. RMBS are submitted, in addition to a process which further increases the stability. On request, non-inductive Resistors are available under the reference RMB NI.

FEATURES
• 0.75 W to 3 W at 25 °C
• NF C 83-210
• CECC 40201-005
• Low temperature coefficient ≤ ± 50 ppm/°C
• Low ohmic values 15 mΩ available
• Excellent behavior against humidity
• Electrical insulation
• Mechanical strength
• Accurate sizes
• Termination = Sn/Ag/Cu or pure matte tin according to the ohmic value
 

상세내역 : high voltage power Resistors

features
• PSN is made completely moisture preventive to be PSO
• PN is a non-inductive type and can be used for high frequency
• PWW Resistors, which are non-inductive Wirewound Resistors for high voltage with resistance wires wound on insulation pipes
• PAP Resistors are non-inductive Wirewound Resistors with inductance less than PWW, can be used for pulse wave measurement, impulse generators, etc. and have the same dimensions as PWW Resistors

상세내역 : MOLDED Wirewound CHIP INDUCTORS

MOLDED Wirewound CHIP INDUCTORS
MCI SERIES

❐ Molded construction, excellent environmental performance
❐ 1210 and 1812 sizes available from stock
❐ Ferrite core, Wirewound construction
❐ Intermediate values, increased current, Q, & SRF available

부품명(s) : SP5086 SP5232
ETC
Unspecified
상세내역 : Precision Wirewound Resistors

[RIEDON]

Precision Wirewound Resistors

• Resistances to 25MOhms
• Resistance Tolerances to ±0.005%
• Temperature Coefficients of ±1 ppm/K
• Power Ratings to 2W
• 100% Acceptance Tested / Traceable to NIST
• Long Term Stability / 100ppm/year
• Matched Resistance Sets to ±0.001% and ±0.5 ppm/K

부품명(s) : SP5086 SP5232
RIEDON
Riedon Powertron
상세내역 : Precision Wirewound Resistors

Precision Wirewound Resistors

• Resistances to 25MOhms
• Resistance Tolerances to ±0.005%
• Temperature Coefficients of ±1 ppm/K
• Power Ratings to 2W
• 100% Acceptance Tested / Traceable to NIST
• Long Term Stability / 100ppm/year
• Matched Resistance Sets to ±0.001% and ±0.5 ppm/K

상세내역 : Insulated Precision Wirewound Resistors Axial Leads

In Wirewound Precision Resistors, the RLP series holds a leading position in professional applications whenever an excellent stability of the ohmic value and a correspondingly low temperature coefficient are required at the same time.

FEATURES
• 1 W to 10 W at 25 °C
• According to CECC 40-201-006
• According to MIL-R-26/5C and MIL-R-26/6C
• Excellent stability < ± 0.3 % after 1000 h
• High power up to 10 W at 25 °C
• Low ohmic values 10 m available
• Low temperature coefficient  ± 50 ppm/°C
• Electrical insulation
• Climatic protection
• Termination = Pure matte tin or Sn/Ag/Cu according to the ohmic value
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

상세내역 : Lead Free Vitreous Enamel Molded Axial Term. Wirewound, 5% Tolerance Standard

When you need the highest quality Wirewound axial terminal Resistors available, choose Ohmite’s 90 Series Resistors.
They are manufactured by a unique process that molds the vitreous enamel over the resistive element, helping to ensure consistent dimensions. This uniformity permits 90 Series Resistors to be mounted in clips, creating a heat-sinking benefit (see next page).
The durable vitreous enamel coating, which is totally lead free, permits the 90 Series Resistors to maintain a hard coating while operating at high temperatures. Mechanical integrity is enhanced by the all-welded construction.

Features
• Molded Construction provides consistent shape
   and size (Permits mounting in clips which extends
   power rating).
• Meets MIL-R-26 requirements for insulated Resistors.
• All-welded construction.
• Flame resistant lead free vitreous enamel coating.
• Higher ratings in smaller sizes.
• Heat sink mounting clips available.
• RoHS compliant; add “E” suffix to part number to
   specify.

상세내역 : Tubular Vitreous Enamelled Wirewound Resistors

General Information
Vitreous enamelled Wirewound Resistors are capable of withstanding a higher dissipation size for size, than any other protected type; this is attributable to the higher operating temperature which the wire and enamel can withstand. Vitreous enamel provides exceptionally good protection to the wire element and is essentially impervious to moisture. The Resistors can safely be used in harsh environmental conditions.
   
• Impervious lead free vitreous enamel coating
• Can be supplied with fixed, adjustable,
    tapped or low inductance winding
• Seven termination styles with choice of
    mounting arrangements
• Manufactured RoHS compliant
    Pb-free terminations*
   

상세내역 : Tubular Vitreous Enamelled Wirewound Resistors

General Information
Vitreous enamelled Wirewound Resistors are capable of withstanding a higher dissipation size for size, than any other protected type; this is attributable to the higher operating temperature which the wire and enamel can withstand. Vitreous enamel provides exceptionally good protection to the wire element and is essentially impervious to moisture. The Resistors can safely be used in harsh environmental conditions.
   
1600/1900 Series
   
• Impervious lead free vitreous enamel coatng
• Can be supplied with fxed, adjustable, tapped or
    low inductance winding
• Seven terminaton styles with choice of mountng arrangements
• Manufactured RoHS compliant Pb-free terminatons

12345678910 Next

All Rights Reserved© datasheetbank.com [ 개인정보 보호정책 ] [ 요청 데이타시트 ][ 제휴문의 ]