datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

P/N + 설명 + 콘텐츠 검색

검색어 :
상세내역 : TaNFilm® High Temperature DIP and SIP Networks

TaNFilm® High Temperature DIP and SIP Networks

The IRC 1900HT and 4700HT Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® DIP and SIP packages. The rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride film insure superior continuous performance in high temperature applications over the installed life of the part.

1900HT / 4700HT SERIES
• Inherent reliability
• Custom configurations available
• Bonded leads not susceptible to solder reflow problems
• Absolute tolerence to ±0.1% - ratio accuracy to ±0.05%
• Absolute TCR to ±25 ppm/°C - ratio tracking to ±5ppm/°C

상세내역 : GANG PROGRAMMERS FOR ST62 MCU FAMILY

DESCRIPTION
The ST62 gang programmers are designed for programming up to 10 EPROM or OTP devices. It can run either in standalone or remote mode under control of a Windows compatible PC.
In standalone mode, the target ST62 MCUs are programmed with a simple key operation directly from a master EPROM memory or from a master EPROM MCU. Two color LEDs indicate for each target device the operational pass or fail. Both VERIFY and BLANK CHECK functions are pro vided.
In Remote mode, the gang programmer is connected to a PC through an RS232 serial channel. Object code in either S19 or INTEL HEX format is read from disk files to program the target devices.
The Windows software also offers VERIFY, BLANK CHECK, READ master and other utility functions. The software allows various user friend ly facilities, such as re-instating the same pro gramming session, user selectable programming steps.
The gang programmer is made up of a two parts, a base unit common to all ST62XX devices and a dedicated package adaptator.

HARDWARE FEATURES
■ Programs simultaneously up to 10 ST62Exx EPROM and OTP MCUs
■ Standalone and PC driven modes
DIP and SO packages supported

SOFTWARE FEATURES
■ Windows based software
■ S19 or INTEL hex file format

상세내역 : 4 PIN to 6 PIN DIP Adapters

DIP ADAPTER MODULES ELIMINATE THE NEED TO REDESIGN MOTHERBOARDS OR MAY BE USED FOR BREADBOARD PROTOTYPING

This new family of Accutek DIP Adapter Modules converts surface mount IC’s to PIN compatible DIP packages for creating drop-in replacements for end-of-life DIP IC’s. Package types supported are: SOJ, PLCC, SOIC, SOP, TSOP, QSOP, HSOP, MSOP, LLP (Leadless Leadframe Package), CSP (Chip Scale Package) and CLCC.
These DIP Adapters were developed for users with motherboard designs that require DIP’s, now obsoleted by manufacturers. These adapter modules save costly motherboard redesigns.
Available with machined or flat contact PINs. Accutek DIP Adapter Modules feature 4 to 84 PINs, are fully assembled and tested and may include a decoupling capacitor. These DIP Adapters can be manufactured turnkey or from customer supplied surface mount chips. Modules range in length from 0.200” to 4.200” depending on number of PINs and incorporate 0.300”, 0.400”, 0.600”, 0.900", 1.200" and 1.400" row-to-row spacing with 0.100” lead spacing.
Custom configurations up to 200 PINs, multi-chip and double sided modules are also available for special functions. A variety of PIN lengths with varying diameters as well as custom sizes and spacing can be specified with different materials and finishes. All modules are designed in-house using PCB CAD workstations. Automated assembly and 100% testing are also performed in-house.

FEATURES
• Saves costly redesign of current motherboards
• Fully tested with lifetime limited warranty
• May include an on board decoupling capacitor
• IC assembly and testing available
• EPROM and Flash programming available
• Custom lead lengths available
• Custom multi-chip and double-sided modules available

상세내역 : 4 PIN to 14 PIN DIP Adapters

DIP ADAPTER MODULES ELIMINATE THE NEED TO REDESIGN MOTHERBOARDS OR MAY BE USED FOR BREADBOARD PROTOTYPING

This new family of Accutek DIP Adapter Modules converts surface mount IC’s to PIN compatible DIP packages for creating drop-in replacements for end-of-life DIP IC’s. Package types supported are: SOJ, PLCC, SOIC, SOP, TSOP, QSOP, HSOP, MSOP, LLP (Leadless Leadframe Package), CSP (Chip Scale Package) and CLCC.
These DIP Adapters were developed for users with motherboard designs that require DIP’s, now obsoleted by manufacturers. These adapter modules save costly motherboard redesigns.
Available with machined or flat contact PINs. Accutek DIP Adapter Modules feature 4 to 84 PINs, are fully assembled and tested and may include a decoupling capacitor. These DIP Adapters can be manufactured turnkey or from customer supplied surface mount chips. Modules range in length from 0.200” to 4.200” depending on number of PINs and incorporate 0.300”, 0.400”, 0.600”, 0.900", 1.200" and 1.400" row-to-row spacing with 0.100” lead spacing.
Custom configurations up to 200 PINs, multi-chip and double sided modules are also available for special functions. A variety of PIN lengths with varying diameters as well as custom sizes and spacing can be specified with different materials and finishes. All modules are designed in-house using PCB CAD workstations. Automated assembly and 100% testing are also performed in-house.

FEATURES
• Saves costly redesign of current motherboards
• Fully tested with lifetime limited warranty
• May include an on board decoupling capacitor
• IC assembly and testing available
• EPROM and Flash programming available
• Custom lead lengths available
• Custom multi-chip and double-sided modules available

상세내역 : Multi-Channel Full-Pitch PHOTOTRANSISTOR Optocoupler

Description
The ACPL-824 is an AC-input dual channel full-pitch PHOTOTRANSISTOR optocoupler which contains four light emitting diode optically coupled to two separate PHOTOTRANSISTOR. It is packaged in a 8-PIN DIP package.
Likewise, the ACPL-844 is an AC-input quad channel full pitch PHOTOTRANSISTOR optocoupler which contains eight light emitting diode optically coupled to four separate PHOTOTRANSISTOR. It is packaged in a 16-PIN DIP package For both types, it is also available in wide-lead spacing option and lead bend SMD option with input-output isolation voltage at 5000 Vrms. Response time, tr, is typically 4 µs and CTR is 20% to 300%.

Features
• Current transfer ratio (CTR: min. 20% at IF = ±1mA, VCE = 5V)
• High input-output isolation voltage (VISO = 5,000VRMS)
• Response time (tr: typ. 4µs at VCE = 2V, IC = 2mA, RL= 100W)
• Compact dual-in-line package
• Safety and regulatory approvals
   - CSA
   - UL 1577
   - IEC/EN/DIN EN 60747-5-2
• Options available:
   – Leads with 0.4” (10.16 mm) spacing (W00)
   – Lead bend for surface mounting (300)
   – Tape and reel for SMD (500) – (ACPL-824 only)
   – IEC/EN/DIN EN 60747-5-2 approved (060)
   – Lead-Free (000E)
  
Applications
• I/O Interface for Programmable controllers, computers
• Sequence controllers
• System appliances, measuring instruments
• Signal transmission between circuits of different potentials and impedances.

 

상세내역 : 4 PIN DIP PHOTOTRANSISTOR AC INPUT PHOTOCOUPLER

Description
The EL814 series of devices each consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a PHOTOTRANSISTOR detector. 
They are packaged in a 4-PIN DIP package and available in wide-lead spacing and SMD option.

Features:
• AC input response
• Current transfer ratio
(CTR: Min. 20% at IF=±1mA ,VCE=5V)
• High isolation voltage between input 
 and output   (Viso=5000 V rms )
• Wide Operating temperature range -55~110ºC
• High collector-emitter voltage VCEO=80V
• Compact dual-in-line package

상세내역 : 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Description 
  The EL816 series of devices each consist of an infrared emitting diodes, optically coupled to a PHOTOTRANSISTOR
detector. They are packaged in a 4-PIN DIP package and available in wide-lead spacing and SMD option.

Features:
•Current transfer ratio
  (CTR: 50~600% at IF=5mA, VCE=5V)
  (CTR: 63~320% at IF=10mA, VCE=5V)
• High isolation voltage between inputs and output (Viso=5000 V rms)
•Creepage distance >7.62 mm
• Operating temperature up to +110°C
• Compact small outline package
•Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CSA approved (No. 1143607)

Applications
• Programmable controllers
• System appliances, measuring instruments
• Telecommunication equipments
• Home appliances, such as fan heaters, etc.
• Signal transmission between circuits of different potentials and impedances

상세내역 : 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Description
The 4N2X, 4N3X, H11AX series of devices each consist of an infrared emitting diode optically coupled to a PHOTOTRANSISTOR.
They are packaged in a 6-PIN DIP package and available in wide-lead spacing and SMD option.

Features:
• 4N2X series: 4N25, 4N26, 4N27, 4N28
• 4N3X series: 4N35, 4N36, 4N37, 4N38
• H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5
• High isolation voltage between input and output
   (Viso=5000 Vrms)
• Creepage distance >7.6mm
• Operating temperature up to +110°C
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approval pending
• NEMKO approval pending
• DEMKO approval pending
• FIMKO approval pending
• CSA approval pending

Applications
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs

상세내역 : 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Description
The CNY17-X and CNY17F-X series of devices each consist of an infrared emitting diode optically coupled to a PHOTOTRANSISTOR.
They are packaged in a 6-PIN DIP package and available in wide-lead spacing and SMD option.

Features
• Current transfer ratios in selected narrow range groups
   CNY17-1, CNY17F-1: 40-80%
   CNY17-2, CNY17F-2: 63-125%
   CNY17-3, CNY17F-3: 100-200%
   CNY17-4, CNY17F-4:160-320%
• High isolation voltage between input and output
   (Viso = 5000 Vrms)
• Creepage distance > 7.6 mm
• Operating temperature up to +110°C
• The CNY17F-X series offers no external base connection
   for minimum noise susceptibility
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approved (No. 716108 /No. 716109)
• NEMKO (No. P06206747)
• DEMKO (No. 313924)
• FIMKO (No. FI 22807)
• CSA approved (No.1969132)

Applications
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs

상세내역 : 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Description
The 4N2X, 4N3X, H11AX series contains an infrared emitting diode optically coupled to a PHOTOTRANSISTOR. It is packaged in a 6-PIN DIP package and available in wide-lead spacing and SMD option.

Features:
• 4N2X series: 4N25, 4N26, 4N27, 4N28
• 4N3X series: 4N35, 4N36, 4N37, 4N38
• H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5
• High isolation voltage between input and output (Viso=5000 V rms)
• Creepage distance >7.6mm
• Operating temperature up to +110°C
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approval pending
• NEMKO approval pending
• DEMKO approval pending
• FIMKO approval pending
• CSA approval pending

Applications
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs

12345678910 Next

All Rights Reserved© datasheetbank.com [ 개인정보 보호정책 ] [ 요청 데이타시트 ][ 제휴문의 ]