datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

P/N + 설명 + 콘텐츠 검색

검색어 :
상세내역 : 7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

■ Features
1. 30 A maximum current
   Single position connector can carry current of 30 A with #10 AWG conductor. Please refer to Table #1 for current ratings for multi position connectors using other conductor sizes.
2. Complete Locking Function
   Reliable interior lock protects mated connectors from accidental disconnection.
3. Prevention of Incorrect Connections
   To prevent incorrect connection when using multiple connectors having the same Number of contacts, 3 product types having different mating configurations are available.
4. Molded-in contact retention tabs
   Handling of terminated contacts during the crimping is easier and avoids entangling of wires, since there are no protruding metal tabs.
5. Prevention of incorrect board placement
   Built-in posts assure correct connector placement and orientation on the board.
6. Supports encapsulation
   Connectors can be encapsulated up to 10 mm without affecting the performance.
7. Prevention of Short Circuits Between Adjacent Contacts
   Each Contact is completely surrounded by the insulator housing electrically isolating it from adjacent contacts.
8. Increased Retention Force of Crimped Contacts and confirmation of complete contact insertion
   Separate contact retainers are provided for applications where extreme pull-out forces may be applied against the wire or when a visual confirmation of the full contact insertion is required.
9. Full Line of Crimp Socket Contacts
   Realizing the market needs for multitude of different applications, Hirose has developed several variants of crimp socket contacts and housings. Continuous development is adding different variations. Contact your nearest Hirose Electric representative for latest developments.
10. In-line Connections
   Connectors can be ordered for in-line cable connections. In addition, assemblies can be placed next to each other allowing 4 position total (2 ∞ 2) in a small space.
11. Listed by UL, C-UL, and TÜV.

■ Applications
  Office equipment, power supplies for industrial, medical and instrumentation applications, variety of consumer electronic, and electrical applications.

상세내역 : Snap Action Switch

General Purpose Snap Action Switch

• Industry standard design with switching currents of 10A to 21A
• Widely used for applications where long life expectancy and high reliability is required.
• Choose from a variety of levers, terminals and operating forces.
• Right and Left Barrier options are available for the V-21 and V-16 models
• Heat resistant versions of the V-15 and V-10 are available.
• RoHS Compliant

상세내역 : Small Signal Zener Diodes

Features
• These diodes are also available in other case styles and other configurations including: the SOD-123 case with type designation BZT52 series, the dual zener diode common anode configuration in the SOT-23 case with type designation AZ23 series and the dual zener diode common cathode configuration in the SOT-23 case with type designation DZ23 series.
• The Zener voltages are graded according to the international E 24 standard. Standard Zener voltage tolerance is ± 5 %. Replace "C" with "B" for ± 2 % tolerance.
• Silicon Planar Power Zener Diodes
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

상세내역 : 5 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER

Description
The EL301X(P5), EL302X(P5) and EL305X(P5) series of devices each consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon random phase photo Triac.
They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 to 240 VAC operations. .

Features:
• Peak breakdown voltage
    - 250V: EL301X(P5)
    - 400V: EL302X(P5)
    - 600V: EL305X(P5)
• High isolation voltage between input and output (Viso=5000 V rms )
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CSA approved
• CQC approved

Applications
• Solenoid/valve controls
• Lamp ballasts
• Static AC power switch
• Interfacing microprocessors to 115 to 240Vac peripherals
• Incandescent lamp dimmers
• Temperature controls
• Motor controls

상세내역 : 6 PIN DIP PHOTOtransistor PHOTOCOUPLER

Description
The 4N2X, 4N3X, H11AX series of devices each consist of an infrared emitting diode optically coupled to a phototransistor.
They are packaged in a 6-pin DIP package and available in wide-lead spacing and SMD option.

Features:
• 4N2X series: 4N25, 4N26, 4N27, 4N28
• 4N3X series: 4N35, 4N36, 4N37, 4N38
• H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5
• High isolation voltage between input and output
   (Viso=5000 Vrms)
• Creepage distance >7.6mm
• Operating temperature up to +110°C
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approval pending
• NEMKO approval pending
• DEMKO approval pending
• FIMKO approval pending
• CSA approval pending

Applications
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs

상세내역 : Small Signal Zener Diodes

FEATURES
• Silicon planar power Zener diodes
• Standard Zener voltage tolerance is ± 5 % with a “B” suffix (e.g.: MMSZ5225B-V), suffix “C” is ± 2 % tolerance
• These diodes are also available in MiniMELF case with the designation TZM5225 to TZM52.7, DO-35 case with type designation 1N5225 to 1N52.7 and SOT-23 case with the type designation MMBZ5225-V to MMBZ52.7-V
• AEC-Q101 qualified
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

상세내역 : Small Signal Zener Diodes, Dual

FEATURES
• These diodes are also available in other case
   styles and configurations including: the dual
   diode common cathode configuration with type
   designation DZ23, the single diode SOT-23
   case with the type designation BZX84C, and the
   single diode SOD-123 case with the type
   designation BZT52C
• Dual silicon planar Zener diodes, common anode
• The Zener voltages are graded according to the international E 24 standard
• The parameters are valid for both diodes in one case. ΔVZ and Δrzj of the two diodes in one case is ≤ 5 %
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

상세내역 : PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,Wrapping Type)

■ Features
1. Compliant with DIN Standard
    Comply with IEC603-2/DIN41612 standard.
2. Variation in number of contacts
    10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and
    144 contacts are available.
3. Two point contact construction
    PCN10 and 12 series are constructed with high reliable doublesided two point contacts.
    PCN13 series pursues after cost performance, and constructed
    with single sided two point contacts.
4. Broad applications
    DIN standard types of B, C, R, and Q are available. The flux tight
    product is available. The easy lock pin type to prefix the board is
    available.
5. Stacking height variation
    PCN10H series contains 25, 30, 35, 40 and 45mm stacking
    height.
6. Circuit protection function available
    PCN10MC series utilizes a sequence structure for circuit
    protection function.
7. Cable connector
    ID connector for ribbon cable is available.
    The connector is prepared for crimping connection for AWC#26
    to 30 cables.
   
■ Application
    Control equipment, exchange, measuring instruments etc.
   

상세내역 : Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)

Overview
The R76 Series is constructed of polypropylene film and double metallized polyester film as electrodes with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting the UL 94V–0 requirements.

Benefts
• Voltage range: 250 – 2,000 VDC
• Capacitance range: 100 pF – 15 µF
• Lead Spacing: 7.5 mm – 37.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56 IEC 60068-1
• Operating temperature range of −55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive (AEC–Q200) grades available up to lead spacing 22.5mm

상세내역 : ECONOLINE DC/DC-Converter

2.2 Watt DIP24 & SMD Single & Dual Output

Features
Regulated Converters
● 2.2W DIP Package
● 1kVDC, 2kVDC & 3kVDC Isolation Options
● Regulated Output
● Wide Input Range 2 : 1 and 4 : 1
● UL94V-0 Package Material
● Continuous Short Circuit Protection
● Cost Effective
● 100% Burned In
● Efficiency to 84%

12345678910 Next

All Rights Reserved© datasheetbank.com [ 개인정보 보호정책 ] [ 요청 데이타시트 ][ 제휴문의 ]