HMC272MS8(2001) 데이터 시트보기 (PDF) - Hittite Microwave

부품명

상세내역

일치하는 목록

HMC272MS8
(Rev.:2001)

GaAs MMIC SMT SINGLE BALANCED MIXER 1.7 - 3 GHz

Hittite Microwave 

MICROWAVE CORPORATION

HMC272MS8

HMC272MS8 SMT SINGLE-BALANCED MIXER 1.7 - 3 GHz

FEBRUARY 2001

Evaluation Circuit Board

4

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have

50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to

that shown below. A sufficient number of VIA holes should be used to connect the top and bottom ground planes.

The evaluation circuit board as shown is available from Hittite upon request.

Evaluation Circuit Board Layout Design Details

Layout Technique

Material

Dielectric Thickness

50 Ohm Line Width

Gap to Ground Edge

Ground VIA Hole Diameter

Grounded Co-Planar Waveguide (GCPW)

FR4

0.028" (0.71 mm)

0.037" (0.94 mm)

0.010" (0.25 mm)

0.014" (0.36 mm)

Connectors

SMA-F ( EF - Johnson P/N 142-0701-806)

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

4 - 162

Web Site: www.hittite.com

Share Link: