NCP15XH103J03RC 데이터 시트보기 (PDF) - Murata Manufacturing
부품명
상세내역
일치하는 목록
NCP15XH103J03RC
Murata Manufacturing
NCP15XH103J03RC Datasheet PDF : 44 Pages
| |||
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R44E.pdf
Dec.17,2012
Inrush Current Suppression Lead Type !Caution/Notice
c Notice (Handling)
1. When this product is operated, temperature of some
area may be about 160 (degree C).
Use proper surrounding parts and material which
withstand such temperature. If they are inadequate
and kept at high temperature for long time, they
may be deteriorated or may produce harmful gas.
And, such harmful gas may deteriorate the element
of this product.
2. This product does not have waterproof construction.
Splashed water may cause failure mode such as
deterioration of characteristics or current leak.
So, do not apply cleaning to immerse it into water
or any solvent.
3. The ceramic element of this product is fragile, and
care must be taken not to load an excessive
press-force or not to give a shock at handling.
Such forces may cause cracking or chipping to the
element.
4. Do not apply an excessive force to the lead wire.
Otherwise, it may cause break off junction between
lead wire and element, or may crack element.
So, fix lead wire of element side when lead wire
is bent or cut.
c Notice (Others)
1. This product may allow passing higher current than
its initial value when it receives inrush current
again just after the last one until it cools down
and recovers its original resistance enough.
Be sure the highest current under actual condition
on the operating repetition and the operating
temperature.
2. The resin coating of this product does not
guarantee insulating. Keep an adequate insulating
distance to surrounding parts.
7
39
Share Link: