EM73469A 데이터 시트보기 (PDF) - ELAN Microelectronics
부품명
상세내역
일치하는 목록
EM73469A Datasheet PDF : 33 Pages
| |||
PIN DESCRIPTIONS
Symbol
Pin-type
P4.1/TRGH
I/O-Q
P4(2,3)
I/O-Q
P8.0(INT1)/WAKEUPA, I/O-S
P8.2(INT0)/WAKEUPC
P8.1(TRGB)/WAKEUPB I/O-S
P8.3(TRGA)/WAKEUPD
SOUND
VA,VB, V1, V2, V3
COM0~COM3
SEG0~SEG31
TEST
EM73469A
4-BIT MICRO-CONTROLLER FOR LCD PRODUCT
Preliminary
Function
SOUND disable, low current push-pull
SOUND disable, normal current push-pull
SOUND disable, high current push-pull
1-bit bidirection I/O port with HTC external input
mask option :
NMOS open-drain
PMOS open-drain
low current push-pull
normal current push-pull
high current push-pull
2-bit bidirection I/O port with high current source
mask option :
NMOS open-drain
PMOS open-drain
low current push-pull
normal current push-pull
high current push-pull
2-bit bidirection I/O port with external interrupt source input and IDLE
releasing function
mask option :
wakeup enable, low current push-pull
wakeup enable, normal current push-pull
wakeup disable, open-drain
wakeup disable, low current push-pull
wakeup disable, normal current push-pull
2-bit bidirection I/O port with time/counter A,B external input and IDLE
releasing function
mask option :
wakeup enable, low current push-pull
wakeup enable, normal current push-pull
wakeup disable, open-drain
wakeup disable, low current push-pull
wakeup disable, normal current push-pull
Melody output
Connect the capacitors for LCD bias voltage
LCD common output pins
LCD segment output pins
Tie Vss as package type, no connecting as COB type.
FUNCTION DESCRIPTIONS
PROGRAM ROM (4K X 8 bits)
4 K x 8 bits program ROM contains user's program and some fixed data.
The basic structure of program ROM can be divided into 5 parts.
1. Address 000h: Reset start address.
2. Address 002h - 00Ch : 6 kinds of interrupt service routine entry addresses.
3. Address 00Eh-086h : SCALL subroutine entry address, only available at 00Eh,016h,01Eh,026h, 02Eh,
036h, 03Eh, 046h, 04Eh, 056h, 05Eh, 066h, 06Eh, 076h, 07Eh, 086h.
4. Address 000h - 7FFh : LCALL subroutine entry address.
5. Address 000h - FFFh : Except used as above function, the other region can be used as user's program region.
* This specification are subject to be changed without notice.
1.9.2001 3
Share Link: 