Power Module
BP5048-24
BP5048 / BP5048-15 / BP5048-24
BP5048-24
12 10 7 5
31
A
VIN
33µF/450V
1.5mH
(C13-FR MITSUMI)
V 220µF/50V
Use a low-impedance product for the output capacitor.
Fig.2
!Application example
Half wave rectifier circuit
BP5048 /
BP5048-15 /
BP5048-24
12
75 31
Full wave rectifier circuit
BP5048 /
BP5048-15 /
BP5048-24
12
+
75 31
OUTPUT
OUTPUT
−
Fig.3
!Operation notes
(1) Output current should be reduced with increasing ambient temperature.
(2) Over current and shorted circuit
The overcurrent protection circuit limits the current to about 330mA (BP5048), 240mA (BP5048-15), 230mA
(BP5048-24) with drooping model. If there is any danger of the load being shorted or overcurrent being produced,
always use a protective device such as a fuse.
(3) Insulation
These products are not insulated on the primary side, and there is a danger of electrical shock if they are touched.
(4) Avoid subjecting these products to strong impact.
(5) Lead pins should be securely connected. If lead pins are not securely connected, irregular voltages could be
produced, causing breakdowns and damage.