AN2067 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

일치하는 목록

AN2067

VIPower™: dimmable white LED power supply with the VIPer53-E

STMicroelectronics 

AN2067

3

Transformer design

Transformer design

3.1

Primary inductance

The primary inductance is set to 0.5 mH, according to the output power required, and the

current capability of the VIPer53-E. The VIPer53-E software helps to define the number of

turns of the primary inductance. It provides a result of 52 turns, in 2 wires. A diameter of 0.4

mm has been chosen.

3.2

3.2.1

Primary auxiliary winding

To guarantee a correct operation, the VIPer53-E should be supplied with at least 12.8 V.

This winding is also used in forward mode. The turn ratio between primary winding and

primary auxiliary winding according to the minimum input voltage (100 VDC) is 0.18.

0.21 is the value used with 11 turns on auxiliary. At maximum input voltage (400 VDC), the

auxiliary supply is 85 V. This provides a constraint on the voltage regulator for the VIPer53-

E.

Secondary winding

The output voltage may vary from 4 V to 40 V, and the reflected voltage must not exceed

100 V. The turn ratio should be 0.5 (26 turns) in order to avoid current mode instability.

A diameter of 0.7 mm is provided by the VIPer53-E software.

3.3

Secondary auxiliary winding

This secondary auxiliary output must guarantee a voltage from 6 V to maximum 32 V

(supply voltage range of the TSM101). The turn ratio is 0.077 (4 turns). This provides a

supply voltage from 7.7 V up to 30.8 V, which is in line with the specification of the TSM101.

3.4

Transformer specifications

Table 2 shows the specifications of the power supply transformer.

DocID10973 Rev 2

11/25

25

Share Link: