ISL97645 데이터 시트보기 (PDF) - Renesas Electronics

부품명

상세내역

일치하는 목록

ISL97645

Boost + VON Slice + VCOM

Renesas Electronics 

ISL97645

Gate Pulse Modulator Circuit

The gate pulse modulator circuit functions as a three way

multiplexer, switching VGHM between ground, VDD1 and

VGH. Voltage selection is provided by digital inputs VDPM

(enable) and VFLK (control). High to low delay and slew

control is provided by external components on pins CE and

RE, respectively. A block diagram of the gate pulse modulator

circuit is shown in Figure 14.

When VDPM is LOW, the block is disabled and VGHM is

grounded. When VDPM is HIGH, the output is determined by

VFLK. When VFLK goes high, VGHM is pulled to VGH by a

70 switch. When VFLK goes low, there is a delay controlled

by capacitor CE, following which VGHM is driven to VDD1,

with a slew rate controlled by resistor RE. Note that VDD1 is

used only as a reference voltage for an amplifier, thus does not

have to source or sink a significant DC current.

VGH

VGH_M

+

VDD1

-

x240

RE

200µA

CE

EnGPM1

+

VREF

-

VFLK

CONTROL AND

TIMING

FIGURE 14. GATE PULSE MODULATOR CIRCUIT BLOCK DIAGRAM

FN9263 Rev 1.00

December 14, 2007

Page 11 of 14

Share Link: