GS9076 데이터 시트보기 (PDF) - Semtech Corporation
부품명
상세내역
일치하는 목록
GS9076 Datasheet PDF : 25 Pages
| |||
1.2 GS9076 Pin Descriptions
GS9076 Data Sheet
Table 1-1: Pin Descriptions
Pin Number Name
1, 3
2
4, 8, 12,16, 32,
43, 49
5, 7
6
9, 11
10
13, 15
14
17, 18
DDI0, DDI0
DDI0_VTT
GND
DDI1,DDI1
DDI1_VTT
DDI2, DDI2
DDI2_VTT
DDI3, DDI3
DDI3_VTT
DDI_SEL[1:0]
Type
Input
Passive
Passive
Input
Passive
Input
Passive
Input
Passive
Logic Input
Description
Serial digital differential input 0.
Center tap of two 50Ω on-chip termination resistors between DDI0 and DDI0.
Recommended connect to GND.
Serial digital differential input 1.
Center tap of two 50Ω on-chip termination resistors between DDI1 and DDI1.
Serial digital differential input 2.
Center tap of two 50Ω on-chip termination resistors between DDI2 and DDI2.
Serial digital differential input 3.
Center tap of two 50Ω on-chip termination resistors between DDI3 and DDI3.
Serial digital input select.
19
20
21
22
23
24, 25, 26
27
28
BYPASS
AUTOBYPASS
AUTO
VCC_VCO
VEE_VCO
SS[2:0]
NC
LOCKED
Logic Input
Logic Input
Logic Input
Power
Power
Bi-directional
No Connect
Output
DDI_SEL1
0
0
1
1
DDI_SEL0
0
1
0
1
INPUT SELECTED
DDI0
DDI1
DDI2
DDI3
Bypass the reclocker stage.
When BYPASS is HIGH, it overwrites the AUTOBYPASS setting.
Automatically bypasses the reclocker stage when the PLL is not locked
This pin is ignored when BYPASS is HIGH.
Auto select.
This pin should be set HIGH for automatic SD-SDI and DVB-ASI standard
detection.
Most positive power supply connection for the internal VCO section.
Connect to 3.3V.
Most negative power supply connection for the internal VCO section.
Connect to GND.
The SS[2:0] pins will display 010 when the internal PLL has locked to a 270Mb/s
input data rate.
Not connected internally.
Lock Detect.
This pin is set HIGH by the device when the PLL is locked.
44617 - 1 January 2008
5 of 25
Share Link: 