Si3000PPT-EVB
Figure 3. Configuration Device Panel
Advanced Configuration
Advanced configuration of the application software is
accomplished by using the “Configure Device” selection
in the “Configure” menu. The configuration panel is
shown in Figure 3. The panel contents are detailed in
the following list:
FFT Window: The FFT window applied to the time
domain data before calculating the FFT.
Acquisition Buffer Size: This is the size of the buffer,
in samples, that is acquired and displayed on the
Line Monitoring mode waveform graph. The buffer
size can be set between 1024 and 65536 samples in
increments of 512 samples.
Display Measurement: Takes realtime
measurements of audio waveform.
8
Rev. 0.1