Si3000PPT-EVB
Figure 1. Si30xxPPT-EVB Evaluation Software in the Audio Data Monitoring View
Audio Data Monitoring View
The audio data monitoring view is discussed in the
following sections.
Receive Audio Data of Channel#
Allows selection of channel to control and view. The
Audio Data Monitoring view allows the generation of
DAC data and the capture and display of ADC data.
Operation of the front panel in Line Monitoring view is
detailed in the following list. See Figure 1.
TX Control
DAC Waveform: Selects the waveform to be
generated by the DAC. The waveform types are as
follows: dc, Sine, Square, Ramp, and .wav file.
TX Gain (dB): Selects the transmit path gain/
attenuation.
TX Mute: This function is not availabe on the
Si3000PPT-EVB
Sampling Rate: This function is not availabe on the
Si3000PPT-EVB
Amplitude: Sets the amplitude of the DAC waveform
in either volts or the units of DAC codes. The units
are determined by the Amplitude Units control.
Frequency: Selects the frequency (Hz) of the
waveform to generate. The actual waveform
frequency may vary slightly from the entered value.
This variation is due to the requirement to fit an
integer number of samples into the transmit buffer.
The control is updated to reflect the actual waveform
frequency generated. The equation for calculating
Rev. 0.1
5