Output Noise Level — VCC
TX (pin 23)
LA8638V
Splatter Filter Cutoff Frequency — VCC
Att. = 3 dB down;
resistance at pin 24
= 4.3 kΩ
TX (pin 23)
TX (pin 23)
Power supply voltage, VCC — V
Splatter Filter Attenuation — VCC
fIN = 5 or 1 kHz;
resistance at pin 24
= 4.3 kΩ
Power supply voltage, VCC — V
Data Shaper Duty Cycle — VCC
Power supply voltage, VCC — V
Data Shaper Dead Zone — VCC
Power supply voltage, VCC — V
Output Level — Ta
Power supply voltage, VCC — V
Current Drain — Ta
No signal
BTL on
BTL off
Standby
Ambient temperature, Ta — °C
Gain Change Level Difference — Ta
RX (pin 10) ← VIN = –20 dBV
TX (pin 23) ← VIN = –60 dBV
TX-DATA (pin 23) ← VIN = –20 dBV
Ambient temperature, Ta — °C
Switches gain between high and low levels.
Resistance at pin 9: 1 kΩ; Resistance
between pins 30 and 29: 4.7 kΩ
Ambient temperature, Ta — °C
No. 5776-13/16