NJU3102 데이터 시트보기 (PDF) - Japan Radio Corporation

부품명

상세내역

일치하는 목록

NJU3102

4-BIT SINGLE CHIP TINY CONTROLLER

Japan Radio Corporation  

NJU3102

• PORTD(PD0−PD3)

PORTD is a 4-bit input-output PORT. When the PORT is set as the output, the signal is output through

the output terminal by writing data to the PORTD register(PHY4). When the PORT is set as the input,

the external signal is gotten directly through the input terminal by reading data from PHY4.

Though the output circuit is Nch open drain type, the C-MOS input buffer is connected to the same

terminal. Therefore, the operating current of the chip by the short circuit current when the middle level

voltage between VDD and VSS is input to this terminal.

[READING PORTD INPUT DATA (PHY4)]

(MSB) 3

2

1

0

(LSB)

PHY4 PD3 PD2 PD1 PD0

PORTD Input Data

[WRITING PORTD OUTPUT DATA (PHY4)]

(MSB) 3

2

1

0 (LSB)

PHY4 PD3 PD2 PD1 PD0

PORTD Output Data

• PORTE(PE0, PE1)

PORTE is a 2-bit input-output PORT. When the PORT is set as the output, the signal is output through

the output terminal by writing data to the PORTE register(PHY5). When the PORT is set as the input,

the external signal is gotten directly through the input terminal by reading data from PHY5.

[READING PORTE INPUT DATA (PHY5)]

(MSB) 3

2

1

PHY5

“0”

“0”

PE1

0 (LSB)

PE0

[WRITING PORTE OUTPUT DATA (PHY5)]

(MSB) 3

2

1

PHY5

–

–

PE1

PORTE Input Data

0 (LSB)

PE0

PORTE Output Data

- 10 -

Share Link: