PI6C2305-1HW 데이터 시트보기 (PDF) - Pericom Semiconductor Corporation

부품명

상세내역

일치하는 목록

PI6C2305-1HW

3.3V Zero-Delay Buffer

Pericom Semiconductor Corporation 

PI6C2305-1

3.3V Zero-Delay Buffer 1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122

Zero-Delay and Skew Control

REF. Input to CLK[1:4] Delay vs. Difference in Loading between CLK[0] pin and CLK[1:4] pins.

800

600

400

200

0

-25

-20

-15

-10

-5

0

5

10

15

20

25

-200

-400

-600

PI6C2305-1H

-800

-900

PI6C2305-1

-1000

Output Load Difference: CLK0 Load - CLK[1:4] Load (pF)

To achieve a Zero Delay between the input and output, all outputs

should be uniformly loaded. The relative loading of CLK0 (with

respect to the remaining outputs) can adjust the input-output delay.

This is shown in the graph above.

For applications requiring zero input-output delay, all outputs

including CLK0 should be equally loaded. Even if CLK0 is not used,

it must have a capacitive load that is equal to that on every other

output. If input-output delay adjustments are required, use the

above graph to calculate loading differences between the feedback

output and remaining outputs.

Maximum Ratings

Supply Voltage to Ground Potential .................–0.5Vto+7.0V

DC Input Voltage (Except REF) ............... –0.5VtoVDD+0.5V

DC Input Voltage REF .............................................. –0.5 to 7V

Storage Temperature ..................................... –65º C to +150ºC

Maximum Soldering Temperature (10 seconds) .............. 260ºC

Junction Temperature ..................................................... 150ºC

Static Discharge Voltage

(per MIL-STD-883, Method 3015) ................................ >2000V

2

PS9477A

06/06/00

Share Link: