MAX2685(1999) 데이터 시트보기 (PDF) - Maxim Integrated

부품명

상세내역

일치하는 목록

MAX2685
(Rev.:1999)

Low-Cost, 900MHz, Low-Noise Amplifier and Downconverter Mixer

Maxim Integrated 

Low-Cost, 900MHz, Low-Noise Amplifier

and Downconverter Mixer

Local-Oscillator Input

The LO port is the high-impedance input of the local-

oscillator buffer. It requires a series DC-blocking

capacitor and a shunt resistor to ground to set the input

impedance. See the Typical Operating Characteristics

for a graph of LO Port Return Loss vs. Frequency.

IF Output Port

The mixer’s downconverted output appears on the dif-

ferential IFOUT+ and IFOUT- pins. The differential out-

put can be converted to a single-ended output, as

shown in the MAX2685 evaluation kit (EV kit). Refer to

the Detailed Description in the MAX2685 EV kit data

sheet.

Shutdown

Drive SHDN low to disable all device functions and

place the MAX2685 in low-power shutdown mode.

Drive SHDN high or connect it to VCC to enable all

device functions.

Applications Information

Layout Considerations

A properly designed PC board is an essential part of

any RF/microwave circuit. Note the IC’s high-frequency

inputs and outputs, and be sure to decouple the DC

supply and control pins.

For power-supply traces and connections, a star topol-

ogy works well. Each VCC node in the circuit has its

own path to the central VCC node and a decoupling

capacitor that provides a low impedance at the RF fre-

quency of interest. The central VCC also has a large

decoupling capacitor. This provides good isolation

between the different sections of the MAX2685.

Chip Information

TRANSISTOR COUNT: 295

_______________________________________________________________________________________ 9

Share Link: