RF3181D 데이터 시트보기 (PDF) - Murata Manufacturing
부품명
상세내역
일치하는 목록
RF3181D Datasheet PDF : 2 Pages
| |||
• Ideal Front-End Filter for 916.5 MHz Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
Pb
• Complies with Directive 2002/95/EC (RoHS)
The RF3181D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 916.5 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz
IF, direct conversion and superregen. Typical applications of these receivers are wireless remote-control and
security, data telemetry, and meter reading devices operating in the USA under FCC Part 15 and in Canada
under DoC RSS-210.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. Murata’s
advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss
with simple external impedance matching (not included).
RFM products are now
Murata products.
RF3181D
916.5 MHz
SAW Filter
SM3838-8 Case
3.8 x 3.8
Characteristic
Center Frequency at 25°C Absolute Frequency
Tolerance from 916.50 MHz
Insertion Loss
3 dB Bandwidth
Rejection (Attenuation: relative to Min IL:)
10 to 895 MHz
895 to 906 MHz
906 to 910 MHz
922 to 925 MHz
925 to 933 MHz
933 to 940 MHz
940 to 1100 MHz
Sym
fc
Δfc
IL
BW3
Temperature
Freq. Temp. Coefficient
Frequency Aging
Absolute Value during the First Year
Input ZIN = RIN/CIN
Impedance @ fC
Output ZOUT = ROUT/COUT
Lid Symbolization (in addition to Lot and/or Date Codes)
Standard Reel Quantity
7 Inch Reel
Standard Reel Quantity
13 Inch Reel
FTC
|fA|
ZIN
ZOUT
Notes
1, 2, 3
1, 3
1, 3
1, 3
3, 4
5
1
9
Minimum
Typical
916.5
Maximum
2.5
4.0
500
600
900
40
50
30
35
25
30
35
40
14
18
30
35
40
45
0.032
≤10
37Ω // 1.6pF
25Ω // 1.8pF
671 // YWWS
500 Pieces/Reel
3000 Pieces/Reel
Units
MHz
kHz
dB
kHz
dB
ppm/
°C2
ppm/yr
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 Ω test system with VSWR ≤ 1.2:1. The
test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss and bandwidth and passband shape are dependent on
the impedance matching component values and quality.
2. The frequency fc is defined as the midpoint between the 3dB frequencies.
3. Where noted specifications apply over the entire specified operating temperature range of -40 to 90°C.
4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may be calculated from:
f = fo [1 - FTC (To - Tc)2].
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically,
aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
9. Tape and Reel Standard for ANSI/EIA 481.
©C2o0p1y0r-i2g0h1t5©byMMuuraattaaEMleactnrounfiaccstNu.rAin.,gInCc.o., Ltd. All Rights Reserved 2013
RF3181D (R) 4/7/15
Page 1 of 2
www.murata.com
Share Link: 