Product Data Sheet
3.0 WATT
MINIATURE SIP DC/DC CONVERTER
HPR2XXC
FEATURES
• ROHS COMPLIANT
• FOUR CHANNELS OF ISOLATED POWER
• HIGH OUTPUT POWER DENSITY: > 9. 4 WATTS/INCH3
• EXTENDED TEMPERATURE RANGE:
-25°C TO +85°C
• HIGH EFFICIENCY: TO 84%
••
LOW COST
HIGH ISOLATION VOLTAGE: 750V CONTINUOUS
INPUT-TO-OUTPUT AND CHANNEL-TO-CHANNEL
•••
SINGLE IN-LINE PACKAGE (SIP)
INTERNAL INPUT AND OUTPUT FILTERING
NON-CONDUCTIVE CASE
The HPR2XXC Series is designed for multiple channel
applications that require small size and could benefit from a
complete one-package solution. The HPR2XXC Series offers
four isolated channels of output power in a footprint less than
the size of many singular devices. This unregulated series of
DC/DC converters provides three watts of total output power.
Each isolated channel can supply up to 750mW.
The HPR2XXC Series uses advanced circuit design and packaging
technology to realize superior reliability and performance. With
only one switching converter on the board, the HPR2XXC
eliminates the possibility of separate converters creating beat
frequencies, or "aliasing" in multiple channel applications.
The high efficiency of the HPR2XXC Series means less internal
power dissipation than comparable solutions. With reduced
heat to dissipate, the HPR2XXC Series can operate at higher
temperatures with no degradation in reliablility. In addition, the
high efficiency of the HPR2XXC Series provides greater than
9 watts/inch3 output power density.
The HPR2XXC Series offers the user low cost without sacrificing
reliability. The use of surface mounted devices and manufacturing
technologies make it possible to offer premium performance
and low cost.
MECHANICAL
TOP
VIEW
2.210+.010
(56.13)
0.340+.010
(8.64)
PIN CONNECTIONS
1. -VOUT1 5.-VOUT2 9. +VIN 14. -VOUT3 18. -VOUT4
2. COM 1 6. COM2 10.-VIN 15. COM3 19. COM 4
3 +VOUT1 7.+VOUT2
16. +VOUT3 20. +VOUT4
FRONT
VIEW
0.030+.010
(0.76)
0.155+.015
(3.94)
BOTTOM
VIEW
0.020+.002
(0.51)
0.400+.010
(10.16)
0.340+.010
(8.64)
RIGHT
SIDE
VIEW
0.010+.002
(0.25)
0.140+.020
(0.25)
0.050+.015
(1.27)
1 2 3 5 6 7 9 10
14 15 16 18 19 20
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
Marked with: specific model ordered, date code, and job code.
HPR2XXCC REV. B (MPS) 12/2008
Page 1