SL4518B 데이터 시트보기 (PDF) - System Logic Semiconductor
부품명
상세내역
일치하는 목록
SL4518B Datasheet PDF : 6 Pages
| |||
SL4518B
Dual Up-Counter
High-Voltage Silicon-Gate CMOS
The SL4518B Dual BCD Up-Counter consists two identical,
internally synchronous 4-stage counters. The counter stages are D-
type flip-flops having interchangeable CLOCK and ENABLE lines for
incrementing on either the positive-going or negative-going transition.
For single-unit operation the ENABLE input is maintained high and the
counter advances on each positive-going transition of the CLOCK. The
counters are cleared by high levels on their RESET lines.
The counter can be cascaded in the ripple mode by connecting Q4
to the enable input of the subsequent counter while the CLOCK input
of the latter is held low.
• Operating Voltage Range: 3.0 to 18 V
• Maximum input current of 1 µA at 18 V over full package-
temperature range; 100 nA at 18 V and 25°C
• Noise margin (over full package temperature range):
1.0 V min @ 5.0 V supply
2.0 V min @ 10.0 V supply
2.5 V min @ 15.0 V supply
ORDERING INFORMATION
SL4518BN Plastic
SL4518BD SOIC
TA = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16=VCC
PIN 8= GND
SLS
System Logic
Semiconductor
FUNCTION TABLE
Inputs
Outputs
CLOCK ENABLE RESET
Mode
H
L Increment Counter
L
L Increment Counter
X
L
No Change
X
L
No Change
L
L
No Change
H
L
No Change
X
X
H
Q1 thru Q4=L
X = don’t care
Share Link: 