AT24C16D-XUM 데이터 시트보기 (PDF) - Atmel Corporation

부품명

상세내역

일치하는 목록

AT24C16D-XUM

I2C-Compatible (2-Wire) Serial EEPROM 16-Kbit (2,048 x 8)

Atmel Corporation 

3.5 Software Reset

After an interruption in protocol, power loss, or system reset, any 2-Wire part can be protocol reset by following

these steps:

1. Create a Start condition (if possible).

2. Clock nine cycles.

3. Create another Start condition followed by a Stop condition as seen in Figure 3-2.

The device should be ready for the next communication after above steps have been completed. In the event

that the device is still non-responsive or remains active on the SDA bus, a power cycle must be used to reset

the device (see Section 8.5.1, “Device Reset”).

Figure 3-2. Software Reset

Dummy Clock Cycles

SCL

1

2

3

Start

Condition

SDA

8

9

Start

Condition

Stop

Condition

6

AT24C16D [DATASHEET]

Atmel-8906C-SEEPROM-AT24C16D-Datasheet_052015

Share Link: