JANTX2N6764 데이터 시트보기 (PDF) - Microsemi Corporation

부품명

상세내역

일치하는 목록

JANTX2N6764

N-CHANNEL MOSFET Qualified per MIL-PRF-19500/543

Microsemi Corporation 

2N6764, 2N6766, 2N6768 and 2N6770

PACKAGE DIMENSIONS

NOTE:

1. Dimensions are in inches.

DIM

INCHES

MIN MAX

2. Millimeters are given for general information only.

A

-

0.875

3. These dimensions should be measured at points .050 B 0.060 0.135

inch (1.27 mm) and .055 inch (1.40 mm) below the

C 0.250 0.360

seating plane. When gauge is not used measurement D 0.312 0.500

will be made at the seating plane.

D2

-

0.050

4. The seating plane of the header shall be flat within

.001 inch (0.03 mm) concave to .004 inch (0.10 mm)

E

0.057 0.063

0.038 0.043

convex inside a .930 inch (23.62 mm) diameter circle F 0.131 0.188

on the center of the header and flat within .001 inch

G 1.177 1.197

(0.03 mm) concave to .006 inch (0.15 mm) convex

H 0.655 0.675

overall.

J 0.205 0.225

5. These dimensions pertain to the 2N6764 and 2N6766 K 0.420 0.440

types.

L 0.495 0.525

6. These dimensions pertain to the 2N6768 and 2N6770 M 0.151 0.161

types.

7. Mounting holes shall be deburred on the seating plane side.

8. Drain is electrically connected to the case.

9. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.

MILLIMETERS

MIN

MAX

-

22.23

1.52

3.43

6.35

9.15

7.92 12.70

-

1.27

1.45

1.60

0.97

1.10

3.33

4.78

29.90 30.40

16.64 17.15

5.21

5.72

10.67 11.18

12.57 13.3

3.84

4.09

NOTES

(3)

DIA. (5)

DIA. (6)

Radius

Radius

DIA. (7)

SCHEMATIC

T4-LDS-0101, Rev. 3 (121466)

©2012 Microsemi Corporation

Page 9 of 9

Share Link: