datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

74ABT899 데이터 시트보기 (PDF) - Fairchild Semiconductor

부품명
상세내역
일치하는 목록
74ABT899 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
November 1992
Revised January 1999
74ABT899
9-Bit Latchable Transceiver
with Parity Generator/Checker
General Description
The ABT899 is a 9-bit to 9-bit parity transceiver with trans-
parent latches. The device can operate as a feed-through
transceiver or it can generate/check parity from the 8-bit
data busses in either direction.
The ABT899 features independent latch enables for the A-
to-B direction and the B-to-A direction, a select pin for
ODD/EVEN parity, and separate error signal output pins for
checking parity.
Features
s Latchable transceiver with output sink of 64 mA
s Option to select generate parity and check or
“feed-through” data/parity in directions A-to-B or B-to-A
s Independent latch enables for A-to-B and B-to-A
directions
s Select pin for ODD/EVEN parity
s ERRA and ERRB output pins for parity checking
s Ability to simultaneously generate and check parity
s May be used in systems applications in place of the
543 and 280
s May be used in system applications in place of the
657 and 373 (no need to change T/R to check parity)
s Guaranteed output skew
s Guaranteed multiple output switching specifications
s Output switching specified for both 50 pF and
250 pF loads
s Guaranteed simultaneous switching noise level and
dynamic threshold performance
s Guaranteed latchup protection
s High impedance glitch free bus loading during entire
power up and power down cycle
s Nondestructive hot insertion capability
s Disable time less than enable time to avoid bus
contention
Ordering Code:
Order Number Package Number
Package Description
74ABT899CSC
M28B
28-Lead Small Outline Integrated Circuit (SOIC), MS-013, 0.300” Wide Body
74ABT899CMSA
MSA28
28-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide
74ABT899CQC
V28A
28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450” Square
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Connection Diagrams
Pin Assignment
for PLCC
Pin Assignment for
SOIC and SSOP
© 1999 Fairchild Semiconductor Corporation DS011509.prf
www.fairchildsemi.com

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]