A1171EEWLT-P2 데이터 시트보기 (PDF) - Allegro MicroSystems
부품명
상세내역
일치하는 목록
A1171EEWLT-P2 Datasheet PDF : 10 Pages
| |||
A1171
Micropower Ultrasensitive Hall Effect Switch
Features and Benefits
▪ 1.65 to 3.5 V battery operation
▪ Low supply current
▪ High sensitivity, BOP typically 30 G (3.0 mT)
▪ Operation with either north or south pole
▪ Configurable unipolar or omnipolar magnetic sensing
▪ Complementary, push-pull outputs
▪ Chopper stabilized
▫ Superior temperature stability
▫ Extremely low switchpoint drift
▫ Insensitive to physical stress
▪ Solid state reliability
▪ Small size
Package: 6 pin DFN/MLP (suffix EW)
Description
The A1171 integrated circuit is an ultrasensitive, Hall effect
switch with latched digital outputs and either unipolar or
omnipolar magnetic actuation. It features operation at low
supply currents and voltages, making it ideal for battery-
operated electronics. The low operating supply voltage,
1.65 to 3.5 V, and unique clocking algorithm assist in reducing
the average operating power consumption. For example, the
power requirement is less than 15 μW with a 2.75 V supply.
Unlike more traditional Hall effect switches, the A1171 allows
the user to configure how the device is magnetically actuated.
Under default conditions the device activates output switching
with either a north or south polarity magnetic field of sufficient
strength. The magnetic actuation can be set via an external
selection pin to operate in a unipolar mode, switching only on
a north or south polarity but not both. Furthermore, the output
of the A1171 can be configured to switch either off or on in the
absence of any significant magnetic field. Lastly, the A1171
has two push-pull output structures.
This polarity-independence, as well as the minimal power
requirements, allows theA1171 to easily replace reed switches,
Not to scale
Continued on the next page…
VDD
1171-DS, Rev. 5
Functional Block Diagram
Clock / Logic
Amp
Low-Pass
Filter
Latch
Latch
GND
SELECT
VOUTPS
VOUTPN
Share Link: 