OPI110 데이터 시트보기 (PDF) - Optek Technology
부품명
상세내역
일치하는 목록
OPI110 Datasheet PDF : 3 Pages
| |||
Optically Coupled Isolator
OPI110, OPI113, OPI1264 Series
Features:
• 10 kV electrical isolation
• Choice of phototransistor or photodarington output
• Low-cost plastic housing
• UL recognized File No. E58730*
Product Photo Here
Description:
Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon
Photosensor. The OPI110 and OPI1264 devices have 890 nm Light Emitting Diode (LED) and NPN
phototransistor sensor, whereas the OP113 has a 890 nm LED and a photodarlington sensor. The devices are
sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor.
The Optoisolators in this data sheet are UL approved under E 58730.
This series is designed for transmission of information between one power supply voltage and another where the
potentials during surge conditions are not greater than the guaranteed isolation voltage.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• High voltage isolation between
input and output
• Electrical isolation in dirty
environments
• Industrial equipment
• Medical equipment
• Office equipment
Part
Number
LED
Peak
Wavelength
OPI110
Ordering Information
Sensor
Isolation
Voltage
(,000)
CTR
Min /
Max
IF (mA)
Typ / Max
VCE
(Volts)
Max
Lead
Length /
Spacing
12.5 / NA
OPI110A
OPI110B
Transistor
25 / NA
50 / 125
10 / 40
OPI110C
100 / NA
OPI113 890 nm Photodarlington 10
50 / NA 5 / 40
30 0.50" / 0.55"
OPI1264
12.5 / NA
OPI1264A
OPI1264B
Transistor
25 / NA
50 / 125
10 / 40
OPI1264C
100 / NA
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 05/07
Page 1 of 3
Share Link: 