PM1012(RevC) 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
일치하는 목록
PM1012 Datasheet PDF : 4 Pages
| |||
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
Differential Input Voltage3 . . . . . . . . . . . . . . . . . . . . . . ± 1 V
Differential Input Current3 . . . . . . . . . . . . . . . . . . . . ± 10 mA
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Operating Temperature Range
PM1012G (P, S) . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Junction Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . +300°C
Package Type
JA4
8-Lead Plastic DIP (P)
103
8-Lead SO (S)
158
JC
Units
43
°C/W
43
°C/W
PM1012
NOTES
1Absolute maximum ratings apply to both DICE and packaged parts, unless
otherwise noted.
2For supply voltages less than ±20 V, the absolute maximum input voltage is equal
to the supply voltage.
3The PM1012’s inputs are protected by back-to-back diodes. Current-limiting
resistors are not used in order to achieve low noise. Differential input voltages
greater than 1 V will cause excessive current to flow through the input protection
diodes unless limiting resistance is used.
4θJA is specified for worst case mounting conditions, i.e., θJA is specified for device
in socket for cerdip, and P-DIP packages; θJA is specified for device soldered to
printed circuit board for SO package.
ORDERING GUIDE
Model
PM1012GP
PM1012GS
Temperature
Range
–40°C to +85°C
–40°C to +85°C
Package
Description
Plastic DIP
SOIC
Package
Options
N-8
SO-8
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the PM1012 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. C
–3–
Share Link: 