TDA8215B 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
일치하는 목록
TDA8215B Datasheet PDF : 9 Pages
| |||
Figure 6 : Frame Oscillator
INPUT CURRENT
COMPENSATION
2
TDA8215B
Vcc1
Frame
sync pulse
To frame amplifier
Frame output amplifier
This amplifier is able to drive directly the frame
yoke. Its output is short circuit and overload pro-
tected; it contains also a thermal protection.
The frame blanking is detectedby the frame flyback
generator. When the output voltage of the frame
amplifier exceeds VCC2-2VBE, the pulse is de-
tected. The line flyback detection is provided by a
comparator which compares the input line flyback
pulse to an internal reference. The burst gate pulse
position is fixed by the external RC network
(Pin 14). It is referenced to the middle of the line
Figure 7 : Super Sandcastle Generator
flyback.
This stage will detect the coincidence between the
line sync pulse (if present) and a 2µs sampling
pulse. This 2µs pulse is positionned at the center
of line sync pulse when the phase loop is locked.
This sampled detection is stored by an external
capacitor Pin 8.
The identification output level is high when video
signal is present.
Important remark : minimum saw-tooth amplitude
on Pin 13 has to be 2VPP (typ. : 2.5VPP).
Line
Vcc1
Flyback
Input
Line
18
Flyback
Σ
RC
Detection
Frame
Output
Frame
Burst gate
Vcc1
10
Blanking
pulse
19
SSC
Output
YOKE
Detection
generator 400µA
RC
Network
14
7/9
Share Link: 