datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

UPD720101 데이터 시트보기 (PDF) - NEC => Renesas Technology

부품명
상세내역
일치하는 목록
UPD720101
NEC
NEC => Renesas Technology NEC
UPD720101 Datasheet PDF : 36 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
µPD720101
Power consumption
Parameter
Power Consumption
Symbol
Condition
Typ.
Typ.
(30 MHz X’tal) (48 MHz OSC)
Unit
PWD0-0
Device state = D0, All the ports does not connect to
any function, and each OHCI controller is under
UsbSuspend and EHCI controller is stopped. Note1
31.4
10.4
mA
PWD0-2
The power consumption under the state without
suspend. Device state = D0, The number of active
ports is 2. Note2
Full- or low-speed device(s) is (are) on the port.
High-speed device(s) is (are) on the port.
53.1
31.9
mA
204.6
204.2
mA
PWD0-3
The power consumption under the state without
suspend. Device state = D0, The number of active
ports is 3. Note2
Full- or low-speed device(s) is (are) on the port.
High-speed device(s) is (are) on the port.
55.3
34.2
mA
253.8
255.5
mA
PWD0-4
The power consumption under the state without
suspend. Device state = D0, The number of active
ports is 4. Note2
Full- or low-speed device(s) is (are) on the port.
High-speed device(s) is (are) on the port.
57.4
36.7
mA
301.6
300.1
mA
PWD0-5
The power consumption under the state without
suspend. Device state = D0, The number of active
ports is 5. Note2
Full- or low-speed device(s) is (are) on the port.
High-speed device(s) is (are) on the port.
59.8
38.8
mA
349.1
345.2
mA
PWD0_C The power consumption under suspend state during
30.5
10.4
mA
PCI clock is stopped by CRUN0. Device state = D0.
PWD1
Device state = D1, Analog PLL output is stopped. Note 3
7.7
10.4
mA
PWD2
Device state = D2, Analog PLL output is stopped. Note 3
7.7
10.4
mA
PWD3H
Device state = D3hot, VCCRST0 = High, Analog PLL
output is stopped. Note 3
7.7
10.4
mA
PWD3C
Device state = D3cold, VCCRST0 = Low. Note 4
0.03
3.81
mA
Notes 1. When any device is not connected to all the ports of HC, the power consumption for HC does not depend
on the number of active ports.
2. The number of active ports is set by the value of Port No Field in PCI configuration space EXT register.
3. This is the case when PCI bus state is B0.
4. This is the case when PCI bus state is B3.
Remark These are estimated value on Windows™ XP environment.
20
Data Sheet S16265EJ4V0DS

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]