VJ0805Y394JXJRW1BC 데이터 시트보기 (PDF) - Vishay Semiconductors

부품명

상세내역

일치하는 목록

VJ0805Y394JXJRW1BC

Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications

Vishay Semiconductors 

www.vishay.com

VJ....W1BC Basic Commodity Series

Vishay

Surface Mount Multilayer Ceramic Chip Capacitors

for Commodity Applications

ELECTRICAL SPECIFICATIONS

Operating Temperature:

C0G (NP0): -55 °C to +125 °C

X5R: -55 °C to +85 °C

X7R: -55 °C to +125 °C

Y5V: -25 °C to +85 °C

Capacitance Range:

C0G (NP0): 0.5 pF to 39 nF

X5R: 47 nF to 220 μF

X7R: 100 pF to 47 μF

Y5V: 10 nF to 100 μF

Voltage Range:

C0G (NP0): 10 VDC to 100 VDC

X5R: 6.3 VDC to 50 VDC

X7R: 10 VDC to 100 VDC

Y5V: 6.3 VDC to 100 VDC

Temperature Coefficient of Capacitance (TCC):

C0G (NP0): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C

X5R: ± 15 % from -55 °C to +85 °C without voltage applied

X7R: ± 15 % from -55 °C to +125 °C without voltage applied

Y5V: + 30 % / - 80 % from -25 °C to +85 °C without voltage

applied

Insulation Resistance (IR) at UR:

 10 G or R x C  500  x F whichever is less

Test Conditions for Capacitance Tolerance:

preconditioning for X5R, X7R, Y5V MLCC: perform a heat

treatment at +150 °C ± 10 °C for 1 h, then leave in ambient

condition for 24 h ± 2 h before measurement

FEATURES

• Available from 0402 to 1210 body sizes

• Ultra stable C0G (NP0) dielectric

• High capacitance in X5R, X7R, Y5V

• For high frequency applications

• Ni-barrier with 100 % tin terminations

• Dry sheet technology process

• Noble Metal Electrode system (NME):

for certain C0G (NP0) values

• Base Metal Electrode system (BME):

for X5R, X7R, Y5V and certain C0G (NP0) values

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Consumer electronics

• Telecommunications

• Data processing

• Mobile applications

Test Conditions for Capacitance and DF Measurement:

measured at conditions of 30 % to 70 % related humidity.

C0G (NP0): Apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % for

caps  1000 pF, at +25 °C ambient temperature

Apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % for

caps > 1000 pF, at +25 °C ambient temperature

X5R / X7R: Caps  10 μF apply 1.0 VRMS ± 0.2 VRMS,

1.0 kHz ± 10 %, at +25 °C ambient temperature (1)

Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS,

120 Hz ± 20 %, at +25 °C ambient temperature

Y5V:

Caps  10 μF apply 1.0 VRMS ± 0.2 VRMS,

1.0 kHz ± 10 %, at +20 °C ambient temperature

Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS,

120 Hz ± 20 %, at +20 °C ambient temperature

Note

(1) Test conditions: 0.5 VRMS ± 0.2 VRMS, 1 kHz ± 10 %

X7R: 0603:  2.2 μF / 10 V

0805: 10 μF (6.3 V and 10 V)

X5R: 0402:  4.7 μF / 6.3 V and  2.2 μF / 10 V

0603: 10 μF (6.3 V and 10 V)

Aging Rate:

C0G (NP0): 0 % per decade

X5R: 6.3 VDC / 10 VDC: 3 % maximum per decade

16 VDC / 25 VDC: 2 % maximum per decade

X7R:  10 VDC: 1.5 % maximum per decade

 16 VDC: 1 % maximum per decade

Y5V: 6.3 VDC: 12.5 % maximum per decade

10 VDC / 16 VDC: 9 % maximum per decade

 25 VDC: 7 % maximum per decade

Dielectric Strength Test:

this is the maximum voltage the capacitors are tested 1 s to

5 s period and the charge / discharge current does not

exceed 50 mA.

 100 VDC: 250 % of rated voltage

Revision: 07-Mar-2019

1

Document Number: 28548

For technical questions, contact: mlcc@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: