The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesq0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
sOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
FPC conductor
surface (Bottom side)
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
11