KIS-3R33S 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

KIS-3R33S

DC-DC Step Down Converter

Unspecified 

A simple, low cost, conversion of incandescent-lamp

illuminator to a power LED

By Dushan Grujich, on October 15th. 2012

My LOMO Biolam 70 has come with the OI-32 illuminator using a 220V AC 15W incandescent-lamp,

which, when used for longer period gets very hot to the touch. This situation had me thinking of replacing

incandescent-lamp with a power LED.

My experimenting with power LEDs resulted in permanent conversion of the OI-32 illuminator.

To drive the power LED I have used a low cost 10 W DC-DC Step Down Converter, KIS-3R33S module,

capable of delivering up to 3A continuously. This module comes with output voltage preset to 3.3V.

However, it is easy to readjust and have output set at any voltage from 1.21 V – 10.43 V, if the circuit is

modified then the output voltage can be varied up to 20V.

The final choice was 1W “Pure White” 150 lm LED with colour temperature of 6000º K, replacing 15 W

lamp rated 90 lm at 230 VAC, which burns out too often due to excessive heat.

Share Link: