MXPLAD6.5KP11A 데이터 시트보기 (PDF) - Microsemi Corporation

부품명

상세내역

일치하는 목록

MXPLAD6.5KP11A

6.5 kW, Unidirectional and Bidirectional TVS Protection Device

Microsemi Corporation 

MPLAD6.5KP10A(e3) –

MPLAD6.5KP48CA(e3)

6.5 kW, Unidirectional and Bidirectional

Available

TVS Protection Device

DESCRIPTION

These 6.5 kW rated transient voltage suppressors (TVS) in a surface mount PLAD package are provided

with design features to minimize thermal resistance and cumulative heating. These devices have the

ability to clamp dangerous high voltage, short term transients such as those produced by directed or

radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit

design. Typical applications include lighting and automotive load dump protection. They are particularly

effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design.

This efficient low profile package design is offered in standoff voltage selections (VWM) of 10 volt to 48

volts in either unidirectional or bidirectional construction. This product addition expands High reliable

PLAD product portfolio. For more information on PLAD products, broad range of TVS devices please

visit our website.

Important: For the latest information, visit our website http://www.microsemi.com.

FEATURES

• Available in both unidirectional and bidirectional construction (bidirectional with CA suffix).

• High reliability with wafer fabrication and assembly lot traceability.

• All parts surge tested.

• Low profile surface mount package.

• Optional upscreening is available with various screening and conformance inspection options based

on MIL-PRF-19500. Refer to Hi-Rel Non-Hermetic Products brochure on our web site for more

details on the screening options.

• Suppresses transients up to 6,500 W @ 10/1000 μs (see figure 1).

• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020.

• 3σ lot norm screening performed on standby current (ID).

• RoHS compliant (2002/95/EC) devices available.

• Halogen free (IEC 61249-2-21)

APPLICATIONS / BENEFITS

• Protection from switching transients and induced RF.

• Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4.

• Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance:

Class 1,2,3,4,5: MPLAD6.5KP10A to 48CA

• Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance:

Class 1,2,3,4: MPLAD6.5KP10A to 48CA

• Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance:

Class 2,3: MPLAD6.5KP10A to 48CA

Class 4: MPLAD6.5KP10A to 22CA

• Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs at 25 ºC)*:

Level 1,2,3,4: MPLAD6.5KP10A to 48CA

Level 5: MPLAD6.5KP10A to 43CA

• Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs at 25 ºC)*:

Level 1 and 2: MPLAD6.5KP10A to 48CA

Level 3: MPLAD6.5KP10A to 36CA

Level 4: MPLAD6.5KP10A to 12CA

• IPP rating of 40.1 amps to 383 amps.

• VWM rating of 10 volts to 48 volts.

• V(BR)(min) range of 11.1 volts to 53.3 volts.

• VC(MAX) rating of 17 volts to 77.4 volts

*See MicroNote 132 for further temperature derating selection.

High-Reliability

screening available

in reference to

MIL-PRF-19500

mini-PLAD

(The cathode is the heatsink

under the body of this device.)

MSC – Lawrence

6 Lake Street,

Lawrence, MA 01841

Tel: 1-800-446-1158 or

(978) 620-2600

Fax: (978) 689-0803

MSC – Ireland

Gort Road Business Park,

Ennis, Co. Clare, Ireland

Tel: +353 (0) 65 6840044

Fax: +353 (0) 65 6822298

Website:

www.microsemi.com

RF01083, Rev A (4/5/13)

©2013 Microsemi Corporation

Page 1 of 6

Share Link: