MKP385147250ACA2Z0 데이터 시트보기 (PDF) - Vishay Semiconductors

부품명

상세내역

일치하는 목록

MKP385147250ACA2Z0

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

Vishay Semiconductors 

www.vishay.com

MKP385

Vishay BCcomponents

MOUNTING

Normal Use

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for

mounting on printed-circuit boards by means of automatic insertion machines.

For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the

printed-circuit board:

• For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads

• For larger pitches the capacitors shall be mounted in the same way and the body clamped

Space Requirements on Printed-Circuit Board

The maximum length and width of film capacitors is shown in the drawing:

For products with pitch  15 mm, w = l = 0.3 mm and h = 0.1 mm

For products with 15 mm < pitch  27.5 mm, w =l = 0.5 mm and h = 0.1

For products with pitch = 37.5 mm w = l = 0.7 mm and h = 0.5 mm

For products with pitch = 52.5 mm, w = l = 1 mm and h = 0.5 mm

Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.

Eccentricity

wmax. = w + Δ

Imax. = I + Δ

hmax. = h + Δ

Seating plane

SOLDERING CONDITIONS

For general soldering conditions and wave soldering provile we refer to the document “Soldering Conditions Vishay Film

Capacitors”: www.vishay.com/doc?28171

STORAGE TEMPERATURE

Storage temperature: Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation.

RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS

Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure

of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.

For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at

the rated temperature and a relative humidity not exceeding 20 %.

Revision: 03-Jun-15

4

Document Number: 28174

For technical questions, contact: dc-film@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: