SL8801/12-111A5-00 데이터 시트보기 (PDF) - 3M

부품명

상세내역

일치하는 목록

SL8801/12-111A5-00

3M™ Twin Axial Cable

3M 

3M™ Twin Axial Cable

SL8800 Series

Your system should be built around performance, not

around your cables.

The 3M Internal Twin Axial Ribbon Cable SL8800 Series is a revolutionary ultra

low-profile, high-speed, high signal density cable. 3M offers a broad line of available

pair counts to cover many of the latest differential pair cable applications.

3M SL8800 Series Cable is an optimal solution for space-constrained systems. This cable is

unjacketed, extremely thin and can even be folded with minimal loss or performance impact.

SL8000 Series Cable can route along the sides of cabinets and through narrow openings in

densely packaged equipment. Some high density offerings sacrifice performance to achieve

density. Flex circuits are often used for tight packaging requirements, but flex circuitry can be

cost prohibitive and can have limited bandwidth in some applications. Long high-speed runs

over FR4 materials may require redrive chips adding cost and complexity to your system.

SL8800 Series Cable is being installed in some of today’s most powerful enterprise and high-

performance computing systems to address both performance and packaging.

No compromises

The SL8800 Series Cable is not just for densely packaged systems. The electrical

performance places this cable in an elite category for skew control, low attenuation and

high bandwidth. Even if your system does not require low-profile cable, the SL8800 Series

Cable still provides you with a quality high performance cable for your high-speed signal

requirements.

3M™ Twin Axial Cable SL8800 Series is

longitudinally shielded and made to exacting

tolerances. It is also flexible, foldable and

highly-routable.

SL8800 Series Cable is a longitudinally shielded cable construction made to exacting

tolerances. The cable suffers little to no resonance or “suck out,” where traditionally

spiral wrapped twin axial cables exhibit an enormous loss of signal at a particular range

of frequency. The cable is also low skew, and the ribbon construction allows customers

to further control any skew that can sometimes be introduced when trying to manage

individual channels. This is especially critical at speeds beyond 10 Gbps. High-speed

applications continue to demand more performance out of the cables, and the SL8800 Series

Cable is designed to deliver that performance.

SL880X Example

Standard Cable

0

2

4

6

8

10

12

Frequency (GHz)

3M™ Twin Axial Cable SL8800 Series exhibits low

loss and no “suckout.”

As signal speeds continue to increase, cable can improve but the termination can still

be a weak point. The SL8800 Series Cable standard ribbon format supports high

performance termination, repeatability, and a reduced possibility for pinout error. When

stripped in parallel, and then applied in parallel, each channel results in an identical

termination length. Control and placement of individual channels is not required,

eliminating the variation in performance and rework due to incorrect placement. This

simultaneous processing can also yield manufacturing efficiency benefits.

Share Link: