datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

NTE1951 데이터 시트보기 (PDF) - NTE Electronics

부품명
상세내역
일치하는 목록
NTE1951 Datasheet PDF : 2 Pages
1 2
NTE1951
Integrated Circuit
Positive 3 Terminal Voltage Regulator,
Low Dropout Voltage, 5V, 1A
Description:
The NTE1951 positive voltage regulator features the ability to source 1A of output current with a drop-
out voltage of typically 0.5V and a maximum of 1V over the entire temperature range. Furthermore,
a quiescent current reduction circuit has been included which reduces the ground current when the
differential between the input voltage and the output voltage exceeds approximately 3V. The quies-
cent current with 1A of output current and an input–output differential of 5V is therefore only 30mA.
High quiescent currents only exist when the regulator is in the dropout mode (VIN – VOUT 3V).
Features:
D Dropout Voltage: 0.5V (Typ) @ IO = 1A
D Output Current in Excess of 1A
D Reverse Battery Protection
D Internal Short Circuit Current Limit
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Input Voltage, VI
Survival Voltage (100ms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60V
Operational Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26V
Internal Power Dissipation (Note 1), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited
maximum Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C
Storage Junction Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Lead Temperature (During Soldering, 10sec max), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +230°C
Note 1. Thermal resistance without a heatsink for junction–to–case temperature is 3°C/W. Thermal
resistance case–to–ambient is 50°C/W

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]