P11A 데이터 시트보기 (PDF) - Vishay Semiconductors
부품명
상세내역
일치하는 목록
P11A
Vishay Semiconductors
P11A Datasheet PDF : 16 Pages
| |||
www.vishay.com
P11S, P11A
Vishay Sfernice
MECHANICAL (initial)
Mechanical Travel
Operating Torque (Typical)
Single and Dual Assemblies
Three to Seven Modules (Per Module)
End Stop Torque
(All Bushing Except G and Concentric Shaft Configuration)
3 mm, 4 mm, and 1/8" Dia. Shafts
6 mm and 1/4" Dia. Shafts
End Stop Torque for Bushing G
All Shafts Dia.
End Stop Torque for Concentric Shaft Configuration
3 mm and 1/8" Dia. Shafts
6 mm and 1/4" Dia. Shafts
Tightening Torque
6 mm, 7 mm, and 1/4" Dia. Bushings
10 mm and 3/8" Dia. Bushings
Weight
300° ± 5°
0.4 Ncm to 1.8 Ncm max. (0.57 oz.-inch to 2.55 oz.-inch max.)
0.2 Ncm to 0.3 Ncm max. (0.28 oz.-inch to 0.42 oz.-inch max.)
35 Ncm max. (2.9 lb-inch max.)
80 Ncm max. (6.8 lb-inch max.)
40 Ncm max. (3.4 lb-inch max.)
25 Ncm max. (2.1 lb-inch max.)
80 Ncm max. (6.8 lb-inch max.)
150 Ncm max. (13 lb-inch max.)
250 Ncm max. (21 lb-inch max.)
7 g to 9 g per module (0.25 oz. to 0.32 oz.)
ENVIRONMENTAL
Operating Temperature Range
Climatic Category
Sealing
P11A
- 55 °C to + 125 °C
55/125/21
IP64
P11S
- 55 °C to + 125 °C
55/125/56
IP64
MARKING
• Potentiometer Module
Vishay logo, nominal ohmic value (Ω, kΩ, MΩ), two stars
identify P11A version, tolerance in % - variation law,
manufacturing date (four digits), “3” for the lead 3
• Switch Module
Version, manufacturing date (four digits), “c” for common
lead
• Indent Module
Version, manufacturing date (four digits)
PACKAGING
• Box
PERFORMANCES
TESTS
Electrical Endurance
Change of Temperature
Damp Heat, Steady State
Mechanical Endurance
Climatic Sequence
Shock
Vibration
CONDITIONS
1000 h at rated power
90’/30’ - ambient temp. 70 °C
- 55 °C to + 125 °C, 5 cycles
+ 40 °C, 93 % relative humidity
P11S: 56 days, P11A: 21 days
50 000 cycles
Dry heat at + 125 °C/damp heat
cold - 55 °C/damp heat, 5 cycles
50 g’s, 11 ms
3 shocks - 3 directions
10 Hz to 55 Hz
0.75 mm or 10 g’s, 6 h
TYPICAL VALUE AND DRIFTS
P11S
ΔRT/RT
Contact resistance variation
±2%
±4%
ΔRT/RT
ΔRT/RT
Insulation resistance
± 0.2 %
±2%
> 1000 MΩ
ΔRT/RT
Contact resistance variation
±5%
±5%
ΔRT/RT
±1%
ΔRT/RT
ΔR1-2/R1-2
ΔRT/RT
ΔV1-2/V1-3
± 0.2 %
± 0.5 %
± 0.2 %
± 0.5 %
P11A
± 10 %
±5%
± 0.5 %
±5%
> 10 MΩ
±6%
±4%
-
± 0.2 %
± 0.5 %
± 0.2 %
± 0.5 %
Revision: 20-Aug-13
3
Document Number: 51031
For technical questions, contact: sferpottrimmers@vishay.com, see also Application Note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: