ALC892
Datasheet
2. Features
2.1. Hardware Features
DACs with 95dB SNR (A-weighting), ADCs with 90dB SNR (A-weighting)
Ten DAC channels support 16/20/24-bit PCM format for 7.1 channel sound playback, plus 2
channels of concurrent independent stereo sound output (multiple streaming) through the front panel
output
Two stereo ADCs support 16/20/24-bit PCM format, multiple stereo recording
All DACs supports 44.1k/48k/96k/192kHz sample rate
All ADCs supports 44.1k/48k/96k/192kHz sample rate
Primary 16/20/24-bit SPDIF-OUT supports 32k/44.1k/48k/88.2k/96k/192kHz sample rate
Secondary 16/20/24-bit SPDIF-OUT supports 32k/44.1k/48k/88.2k/96k/192kHz sample rate
16/20/24-bit SPDIF-IN supports 44.1k/48k/96k/192kHz sample rate
All analog jacks (port-A to port-G) are stereo input and output re-tasking
Port-D/E/F built-in headphone amplifiers
Port-B/C/E/F with software selectable boost gain (+10/+20/+30dB) for analog microphone input
High-quality analog differential CD input
Supports external PCBEEP input and built-in digital BEEP generator
Software selectable 2.5V/3.2V/4.0V VREFOUT
Up to four channels of microphone array input are supported for AEC/BF applications
Three jack detection pins; each designed to detect up to 4 jacks
Supports legacy analog mixer architecture
Up to two GPIOs (General Purpose Input and Output) for customized applications. GPIO0 and
GPIO1 share pin with DMIC-CLK and DMIC-DATA
Supports mono and stereo digital microphone interface (pins shared with GPIO0 and GPIO1)
Supports anti-pop mode when analog power LDO-IN is on and digital power is off
Content Protection for Full Rate lossless DVD Audio, Blu-ray DVD, and HD-DVD audio content
playback (with selected versions of WinDVD/PowerDVD/TMT)
1dB per step output volume and input volume control
7.1+2 Channel HD Audio Codec with Content Protection 2
Track ID: JATR-2265-11 Rev. 1.3