AN-9719
Pin (S → F)
Na
5→4
Insulation : Polyester Tape t = 0.025mm, 2 Layers
Np
2→1
Insulation : Polyester Tape t = 0.025mm, 2 Layers
-
4→-
Insulation : Polyester Tape t = 0.025mm, 2 Layers
Ns
8 → 10
Insulation : Polyester Tape t = 0.025mm, 3 Layers
Wire
0.3φ×1
0.26φ×1
COPPER SHIELD
0.35φ×1
Inductance
Leakage
Pin
1-2
1-2
Specification
600μH ± 10%
< 30 μH Maximum
APPLICATION NOTE
Turns
13
75
1.2
13
Remark
100kHz, 1V
Short All Other Pins
Related Datasheets
FSL127H — Green Mode Fairchild Power Switch (FPS™)
FSL137H— Green Mode Fairchild Power Switch (FPS™)
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which,
(a) are intended for surgical implant into the body, or (b)
support or sustain life, or (c) whose failure to perform when
properly used in accordance with instructions for use provided
in the labeling, can be reasonably expected to result in
significant injury to the user.
2. A critical component is any component of a life support device
or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
© 2010 Fairchild Semiconductor Corporation
Rev. 1.0.0 • 11/2/10
12
www.fairchildsemi.com