DG412AK 데이터 시트보기 (PDF) - Maxim Integrated
부품명
상세내역
일치하는 목록
DG412AK Datasheet PDF : 12 Pages
| |||
Improved, Quad,
SPST Analog Switches
ABSOLUTE MAXIMUM RATINGS
(All Voltages Referenced to V-.)
V+ .........................................................................................44V
GND .....................................................................................25V
VL .....................................................(GND -0.3V) to (V+ +0.3V)
Digital Inputs, VS, VD (Note 1)........(V- -2V) to (V+ +2V) or 30mA
(whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current
(pulsed at 1ms, 10% duty cycle max) ............................100mA
Continuous Power Dissipation (TA = +70°C)
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C) .842mW
16-Pin Narrow SO (derate 8.70mW/°C above +70°C) ...696mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C)......800mW
16-Pin TSSOP (derate 6.7mW/°C above +70°C) ...........457mW
16-Pin QFN (derate 19.2mW/°C above +70°C) ...........1538mW
Operating Temperature Ranges
DG41_C_ ..............................................................0°C to +70°C
DG41_D_ ...........................................................-40°C to +85°C
DG41_AK_ .......................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 15V, V- = -15V, VL = 5V, VGND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
SWITCH
Analog Signal Range
VANALOG (Note 3)
Drain-Source
On-Resistance
On-Resistance
Match Between Channels
(Note 4)
On-Resistance Flatness
(Note 4)
RDS(ON)
ΔRDS(ON)
RFLAT(ON)
V+ = 13.5V,
V- = -13.5V,
VD = ±8.5V,
IS = -10mA
V+ = 15V, V- = -15V,
VD = ±10V,
IS = -10mA
V+ = 15V, V- = -15V,
VD = ±5V, 0V,
IS = -10mA
Source Off-Leakage Current
(Note 7)
IS(OFF)
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
Drain Off-Leakage Current
(Note 7)
ID(OFF)
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
Drain On-Leakage Current
(Note 7)
ID(ON)
+
IS(ON)
V+ = 16.5V,
V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
TA = +25°C
C, D
A
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to
TMAX
C, D, A
C, D
A
TA = +25°C
TA = TMIN to
TMAX
C, D, A
C, D
A
TA = +25°C
TA = TMIN to
TMAX
C, D, A
C, D
A
MIN TYP MAX
(Note 2)
-15
15
17
45
17
30
45
3
5
4
6
-0.25 -0.10 0.25
-5
5
-10
10
-0.25 -0.10 0.25
-5
5
-10
10
-0.4
-0.1
0.4
-20
20
-40
40
UNITS
V
Ω
Ω
Ω
nA
nA
nA
2 _______________________________________________________________________________________
Share Link: 