Input signal
ALC gain
0dB
Attack Rate
Output signal
ALC5633Q
Datasheet
Target Level
Recovery Rate
Figure 13. ALC for Playback Mode
Recording Mode:
For ADC recording mode, when the input signal exceeds target threshold, the signal will decrease “ALC
Digital Volume” (0.375dB/step at every zero-crossing) until drop to target level then keep the digital
volume. When input signal is below the target threshold, the signal will step-up “ALC Digital Volume”
(0.375dB/step every zero-crossing) until return to original level. If want to return to the target level, need
to set the pre-gain to achieve.
When input signal is below noise gate, the input signal will be reduced and to suppress the background
noise. The reducing level can be set by register. And when input signal is above noise gate, the input
signal will be boosted to target level.
I2S Stereo Audio Codec + Mono Class-AB/D Amp
16
Rev. 0.1