09MSP60-06B06N 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

09MSP60-06B06N

Multi-Deck Rotary Switches

Unspecified 

Multi-Deck Rotary Switches

Military Qualified

Series 08 and 09 military switches are qualified

to MIL-DTL-3786/13. They include 30°, 36°, 45°

and 60° angles of throw with solder lug terminals

in sealed and unsealed styles. See front and rear

views at right. Standard variations which do not

affect switch performance can also be marked as

qualified product–contact Grayhill.

Front view shows terminal location of

Series 09, 30° angle of throw. Transpose

rear view for terminal location of other

angles of throw.

.260 ± .015

(6,60 ± 0,38)

CL OF NON-TURN

TAB

Series 09

30° Angle of Throw

.562 ± .020

(14,27 ± 0,51)

DIA.

.781 ± .020

(19,83 ± 0,51)

OVER TERMINALS

The military style is dimensionally the same as

the standard except for the solder lug. Convert

standard style switch drawings to military style

drawings by including this terminal detail and

changing the over-terminal dimensions shown

here. Grayhill can provide complete specification

drawings. Qualified switches can be ordered by

the Grayhill number or the "M" number; they will

be marked per MIL-DTL-3786/13.

15°

SEE NOTE

30°

.094 ± .010

(2,38 ± 0,25)

Note: Common location for a single pole per

deck switch. For common location on

multi-pole switches, see circuit diagrams.

11 10 9 8

.034 ± .003

(0,86 ± 0,08)

Series 08

36° Angle of Throw

.500 ± .020

(12,7 ± 0,51)

DIA.

.718 ± .020

(18,24 ± 0,51)

OVER

TERMINALS

87

36°

Terminal Detail

.068 ± .005

(1,73 ± 0,13)

Specifications

Electrical Ratings

Standard Style

Rated: To make and break the following loads:

1/4 amp, 115 Vac resistive; 1/4 amp, 6-28 Vdc

resistive; 20 mA, 115 Vdc resistive; 50 mA, 115

Vac inductive; 20 mA, 28 Vdc inductive; to carry

4 amps continuous.

Contact Resistance: After 25,000 cycles of

operation, 50 milliohms maximum

Insulation Resistance: 1,000 megohms

minimum between terminals and shaft

Voltage Breakdown: 1,000 Vac initially

(500 Vac or better after most environmental

tests)

Life Expectancy: 50,000 mechanical cycles

of operation. Note: Actual life is determined

by a number of factors, including electrical

loading, rate of rotation and environment, as

well as maximum contact resistance, minimum

insulation resistance and minimum voltage

breakdown required at the end of life.

Electrical Ratings

Military Qualified

Qualified to the following MIL-DTL-3786/13

Circuit Values: (Also see Standard Style

description.)The Series 08M and 09M have been

tested to meet the requirements of MIL-S-3786,

Style SR13, the majority of which are listed. At

85°C, approximately 68% relative humidity and

sea level pressure, the switches have been

tested to make and break the following loads, as

stated in MIL-DTL-3786/SR13: 125 milliamperes

at 28 Vdc resistive: 75 milliamperes at 115 Vac

resistive.

The switches have also been tested at reduced

barometric pressure (70,000 feet), 25°C at

approximately 68% relative humidity to make

and break the following loads as stated in

MIL-DTL-3786/SR13. 50 milliamperes 28 Vdc

resistive; 20 milliamperes 115 Vac resistive.

When tested to the above loads at the stated

conditions, the Series 08M and 09M switches

meet the following life-limiting criteria after

25,000 cycles of operation in accordance with

MIL-DTL-3786.

Contact Resistance: 50 milliohms maximum

after life

Insulation Resistance: 1,000 megaohms

minimum between terminals and shaft

Dielectric Strength: 500 Vac (atmospheric

pressure) and 350 Vac (reduced pressure)

between mutually insulated parts.

The Series 08M and 09M also meet the

requirements of MIL-DTL-3786 SR13 for

moisture resistance, stop strength, rotational

torque, vibration (10 to 2,000 cps), medium and

high shock, salt spray, explosion, thermal shock

(-65°C to 85°C) and terminal pull. When tested

at sea level, 25°C and 68% relative humidity with

failure criteria of 50 milliohms maximum contact

resistance and 500 Vac breakdown voltage, these

switches will make and break 250 mA at 28 Vdc

inductive (250 millihenries): 1/2 amp: at 28 Vdc

resistive: 1/2 amp; at 115 Vac: 60 Hz resistive

for 10,000 cycles of operation.

Materials and Finishes

Standard Style

Switch Bases: Melamine per (MIL-M-14) ASTM-

D-5948

Cover, Deck Separators and End Plate:

Phenolic per (MIL-M-14) ASTM-D-5948

Rotor Mounting Plate: Thermoplastic

Mounting Bushing: Brass, tin/zinc-plated.

Shaft, Retaining Rings,Through Bolts, Shaft

Extension, Stop Washers, Stop Arm, Thrust

Washers, Nuts, Cover Plate and Rear Support

Plate: Stainless steel

Detent Balls: Steel, nickel-plated

Detent Springs: Tinned Music wire

Terminals, Stator (Base) Contacts and

Common Plate: Brass, gold plate .00001"

minimum over silver plate .0003" minimum

Rotor Contact: Silver alloy, gold-plated .00001"

minimum

Mounting Hardware: Two mounting nuts .062"

(1,57) thick by .312" (7,92) across flats and one

internal lockwasher are supplied with switch.

Lockwasher: Stainless steel

Mounting Nuts,Washers: Brass, tin/zinc-plated

and or stainless steel.

Materials and Finishes

Military Qualified

Deck Separators, End Plate and Switch Bases:

Diallyl per (MIL-M-14) ASTM-D-5948

Rotor Mounting Plate: Thermoplastic

Mounting Bushing: Brass, tin/zinc-plated.

Shaft, Cover, Stop Plate, Retaining Ring,

Through Bolts, Shaft Extension, Stop Arm,

Thrust Washers, Cover Plate and Rear

Support Plate, Lockwashers and Nuts:

Stainless steel

Detent Balls: Steel, nickel-plated

Detent Springs: Tinned music wire

Terminals, Stator (Base) Contacts and

Common Plate: Brass, gold plate .00001"

minimum over silver plate .0003" minimum

Rotor Contact: Silver alloy, gold-plated .00001"

minimum

Mounting Hardware: Two mounting nuts .062"

(1,57) thick by .312" (7,92) across flats and one

internal tooth lockwasher are supplied with this

switch.

Mounting Nuts,Washers: Brass, tin/zinc-plated

and or stainless steel.

Additional Characteristics

Standard Style and Military Qualified

Contacts: Shorting or Non-shorting contacts

available in 30°, 36° and 45° angle of throw rotary

switches.Non-shorting contacts available in 60°

and 90° angle of throw switches. All are wiping

contacts with over 100 grams of contact force.

Stop Strength: 12 lb-inches minimum

Rotational Torque: 8-64 oz-in depending upon

the number of poles per deck and the number

of decks

Extended Studs: Switches of six decks or

more have longer studs with extra stud nuts for

recommended double end mounting.

Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Share Link: