LA7578N 데이터 시트보기 (PDF) - SANYO -> Panasonic
부품명
상세내역
일치하는 목록
LA7578N Datasheet PDF : 18 Pages
| |||
Design Materials
Fig. 5
LA7578N
Pin 1 (FM detector output)
Pin 1 is the audio FM output pin. A 200Ω resistor is connected
in series with the emitter follower.
(1) Audio multiplexing applications
Depending on the audio multiplexing decoder input
application, the input impedance may be low, the L-R
signals, etc., may be distorted, or the stereo characteristics
may be degraded. In this type of situation, add a resistor
between pin 1 and GND as shown in Fig. 6.
R1 ^ 5.1 kΩ
(2) Monaural applications
Add a de-emphasis circuit with external CR.
t = CR2
Fig. 6 De-emphasis
Pin 2 (FM discriminator)
Pin 2 is the phase shifter pin for an FM quadrature detector.
This pin generates the 90 deg phase shift signal needed for
quadrature detection and adds it to the multiplier.
(1) The detector band characteristics are primarily determined
by the coil Q and coil damping resistance. Determine the
damping characteristics in accordance with the output level
and band characteristics.
(2) When muting is applied, DC voltage (1 V or less) is
applied to point A.
0.01µF
Fig. 7
No.4037-9/18
Share Link: 