MDT80C06 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

일치하는 목록

MDT80C06

PS2 optical 2D/3D, 3/5 key mouse controller

Unspecified 

MDT80C06

PS2 optical 2D/3D, 3/5 key mouse controller

IN DETAIL:

(a). Reset (FF)

The MDT80C06 reset to initial mode as power on and transmit FA, AA, 00 to system 8042. Then set

default states as below :

sampling rate：100 reports/s

2 dots/count

non-autospeed

stream mode

disable

(b). Resend (FE)

a. When MDT80C06 receives an invalid command, it returns a Resend code to the system.

b. If MDT80C06 receives a Resend command, its last packet of data will send again to the system.

(c). Set Default (F6)

Initializes mouse conditions to the power-on default states.

(d). Disable(F5)

To disable mouse transmissions to system.

(e). Enable (F4)

To enable mouse transmissions to system if in stream mode.

(f). Set Sampling Rate (F3, XX)

Sets the sampling rate as described below

Second byte XX

C8

64

50

3C

28

14

0A

Sample Rate

200/sec

100/sec

80/sec

60/sec

40/sec

20/sec

10/sec

(g). Read Device Type (F2)

MDT80C06 send ‘’ FA, 00’’ for standard mouse or send “FA,03” for Microsoft Inteli 3D mouse or send

“FA, 04” for 3D/5key mouse

(h ). Set Remote Mode (F0)

Set reports only in response to system Read Data(EB) command.

This specification is subject to be changed without notice. Please visit our web site for the most updated information.

http://www.mdtic.com.tw

P.4

2003/9 V1.2

Share Link: