datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

CS8161YTHA5 데이터 시트보기 (PDF) - ON Semiconductor

부품명
상세내역
일치하는 목록
CS8161YTHA5 Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
CS8161
1.305
VIN = 14 V
1.300
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
(1.8500 V, 253.9 nA.)
100
80
1.295
60
40
1.290
20
1.285
−40 −20 0
20 40 60 80 100 120 140
Temperature (°C)
Figure 14. Enable Threshold Voltage vs.
Temperature
0
0
1
2
3
4
5
VENABLE (V)
Figure 15. ENABLE Current vs. ENABLE
Voltage
5
4
3
2
1
0
0
5
10
15
20
25
VENABLE
Figure 16. 12 mA ENABLE Current vs.
ENABLE Voltage
DEFINITION OF TERMS
Dropout Voltage − The input−output voltage differential
at which the circuit ceases to regulate against further
reduction in input voltage. Measured when the output
voltage has dropped 100 mV from the nominal value
obtained at 14 V input, dropout voltage is dependent upon
load current and junction temperature.
Input Voltage − The DC voltage applied to the input
terminals with respect to ground.
Input Output Differential − The voltage difference
between the unregulated input voltage and the regulated
output voltage for which the regulator will operate.
Line Regulation − The change in output voltage for a
change in the input voltage. The measurement is made under
conditions of low dissipation or by using pulse techniques
such that the average chip temperature is not significantly
affected.
Load Regulation − The change in output voltage for a
change in load current at constant chip temperature.
Long Term Stability − Output voltage stability under
accelerated life−test conditions after 1000 hours with
maximum rated voltage and junction temperature.
Output Noise Voltage − The rms AC voltage at the
output, with constant load and no input ripple, measured
over a specified frequency range.
Quiescent Current − The part of the positive input
current that does not contribute to the positive load current,
i.e., the regulator ground lead current.
Ripple Rejection − The ratio of the peak−to−peak input
ripple voltage to the peak−to−peak output ripple voltage.
Temperature Stability of VOUT − The percentage
change in output voltage for a thermal variation from room
temperature to either temperature extreme.
http://onsemi.com
6

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]