PI74FCT374ATHE 데이터 시트보기 (PDF) - Pericom Semiconductor

부품명

상세내역

일치하는 목록

PI74FCT374ATHE

Fast CMOS Octal D Registers (3-State)

Pericom Semiconductor 

PI74FCT374T

PI74FCT574T

1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788O9900c1122t33a44l5566D778899R0011e2233g44i55s6677t88e99r00s1122(1132233-44S5566t77a88t99e0011)22

Power Supply Characteristics

Parameters Description

ICC

Quiescent Power

Supply Current

∆ICC

Supply Current per

Input @ TTL HIGH

ICCD

Supply Current per

Input per MHz(4)

IC

Total Power Supply

Current(6)

Test Conditions(1)

VCC = Max.

VIN = GND or VCC

Min. Typ(2) Max. Units

0.1 500 µA

VCC = Max.

VIN = 3.4V(3)

0.5 2.0 mA

VCC = Max.,

Outputs Open

OE = GND

One Input Toggling

50% Duty Cycle

VCC = Max.,

Outputs Open

fCP = 10 MHZ

50% Duty Cycle

OE = GND

fI = 5 MHZ

One Bit Toggling

VCC = Max.,

Outputs Open

fCP = 10 MHZ

50% Duty Cycle

OE = GND

Eight Bits Toggling

fI = 2.5 MHZ

50% Duty Cycle

VIN = VCC

VIN = GND

VIN = VCC

VIN = GND

VIN = 3.4V

VIN = GND

VIN = VCC

VIN = GND

VIN = 3.4V

VIN = GND

0.15 0.25 mA/

MHz

1.5 3.5(5) mA

2.0 5.5(5)

3.8 7.3(5)

6.0 16.3(5)

Notes:

1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device.

2. Typical values are at Vcc = 5.0V, +25°C ambient.

3. Per TTL driven input (VIN = 3.4V); all other inputs at Vcc or GND.

4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.

5. Values for these conditions are examples of the Icc formula. These limits are guaranteed but not tested.

6. IC =IQUIESCENT + IINPUTS + IDYNAMIC

IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fINI)

ICC = Quiescent Current

∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4 V)

DH = Duty Cycle for TTL Inputs High

NT = Number of TTL Inputs at DH

ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)

fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)

fI = Input Frequency

NI = Number of Inputs at fI

All currents are in milliamps and all frequencies are in megahertz.

4

PS2016C 10/01/04

Share Link: