3196 데이터 시트보기 (PDF) - ASM GmbH
부품명
상세내역
일치하는 목록
3196 Datasheet PDF : 12 Pages
| |||
3
Supports data analysis with a wide range of functions!
The 3196 measures, records and analyzes power line quality
Features
■ Supports single-phase 2-wire, single-phase 3-wire, three-phase
3-wire and three-phase 4-wire systems. Further, the unit has an
extra input channel providing enhanced analysis capabilities.
An isolated CH4 terminal is provided for AC and DC measurement.
• Neutral line measurement you can use for ground fault detection!
• Analyze DC power supplies
• Performs simultaneous analysis of two isolated systems, such as single
phase and three phase lines
■ Comes equipped with ∆-Y and Y-∆ conversion functions
Supports ∆-Y voltage conversion for three-phase, 3-wire systems, and Y-∆
voltage conversion for three-phase, 4-wire systems. Selectable display of inter-
line voltage and phase voltage.
■ Wide selection of clamp on current sensors
In addition to clamp-on current sensors Models 9660 (100 A), 9661(500 A),
9669 (1000 A), and 9667 (5000 A, flexible), HIOKI also provides the 9694
(5 A) sensor, which is ideal for CT terminal measurement, as well as two
other clamps for 5A leak measurement, Models 9657-10 and 9675, to suit
every application need.
■ Three-phase voltage wiring adapter (optional)
Use the wiring adapter to simplify voltage wiring procedures.
• 9264-01 for three-phase, 3-wire systems
• 9264-02 for three-phase, 4-wire systems
* The 9264-01/02 Wiring Adapters are designed to reduce voltage cord wiring to
a bare minimum for use with specific power lines. Do not use with installations
other than those specified.
9264-02
CH4 terminal
for measuring DC voltage
Full compatibility to 400Hz circuits
(Please specify inspection data sheet requirements for 400 Hz test points at time of order.)
■ Simultaneous measurement and continuous processing
All data are measured simultaneously and processing is performed
continuously, so important fault data is not missed.
Further, transient overvoltages up to 2000 V with durations as low as 0.5 µs
are captured without fail.
■ Seven different display languages
Select a display language from Japanese, English, German, French, Spanish,
Italian or Chinese .You can switch between the different display languages
to suit your location.
■ 6.4-inch color LCD
The unit uses a TFT color LCD screen, providing bright display with a wide
viewing angle.The color display provides easy viewing of waveforms, both
indoors and out.
■ Extended measurement of up to one month with internal memory
The unit's internal memory (13 MB) supports up to one month of
continuous recording.
*The amount of time available for continuous measurement can be checked when
setting the measurement interval.
*Use a PC card to record at shorter measurement intervals over longer periods in
conjunction with the internal memory.
Storage Storage of Events Interval Power
P&Harm ALL DATA
Media
(Usage capacity) time Saving RMS only Saving RMS + harmonics Save all data
Internal Memory
Time Series: 5MB Fixed
Max. 100
Events: 8MB Fixed (approx. 8MB)
1s
2 h 01 m
8m
1 m 5 days 1 hour 8 h 29 m
1h
31 days
21 days 5 h
5m
5 h 45 m
14 days 9 h
When storing 1 m
100 (approx. 8MB)
PC Card Max. 1000 1 m
(128MB) (approx. 81MB)
Max. 1000 1 s
(approx. 81MB)
31 days
[119 days]
31 days
[36 days]
14 h 40 m
8 days 8 h 5 days 16 h
2 days 13 h 1 days 17 h
1h1m
41 m
*When recoriding Time Series data, select MAX/MIN/AVE
*Refer to the specifications for details regarding the recordable items.
*Max. continuous save: 31 days
*During the measurement period, all dips, swells and interruptions are calculated.
■ PC card slot
Flash ATA cards up to 528 MB can be used to allow
more detailed data collection.
Compact flash cards can also be used with an adapter.
■ LAN and RS-232C interfaces
The 3196 features an HTTP server to enable easy
configuration and data analysis through a Web
browser from a remote location.
■ Synchronize the 3196 clock
Connect the optional XD112 GPS Box to make sure
the time recorded for measured events is based on the
global standard time.
■ External event input/output terminals
Event output :
Outputs a signal when events occur-either as an
alarm or device control signal.
Event input :
Accepts a trigger signal to initiate measurement.
Set includes antenna
and RS-232C cable
■ Optional printer for easy hard copy output
Connect the optional 9670 printer to the RS-232C ■ Two types of carrying case available (optional)
terminal for easy hard copy output of screens.
Choose from the soft (9339) or hard (9340) carrying
case and measure while the 3196 is safely stored.
The top side of the
case holds the 3196.
■ Small and Lightweight
Compact A4 size, and weighing only 2.25 kg
(79.4 oz).
Printing method : Thermal line dot
Printing width : 72 mm (2.83")
Printing speed : 47.5 mm/sec (1.87"/sec)
Power supply : 9671 AC ADAPTER or the BATTERY PACK
Dimensions and mass : 119 (4.69") × 77 (3.03") × 174 (6.85") mm, approx. 500 g (17.6 oz.)
Model 9339
soft case
The bottom side of the
case holds accessories.
Share Link: 