HVGC-150-500 데이터 시트보기 (PDF) - Mean Well Enterprises Co., Ltd.

부품명

상세내역

일치하는 목록

HVGC-150-500

150W Single Output LED Power Supply

Mean Well Enterprises Co., Ltd. 

150W Single Output LED Power Supply

HVGC-150 series

■ Features :

Constant current design

Wide input range 180~528VAC

Built-in active PFC function

High efficiency up to 91%

Protections: Short circuit / Over voltage / Over temperature

Cooling by free air convection

OCP point adjustable through output cable or internal potentiometer

IP67 / IP65 design for indoor or outdoor installations

Three in one dimming function (0~10Vdc or 10V PWM signal or resistance)

Suitable for LED lighting and street lighting applications

Compliance to worldwide safety regulations for lighting

Suitable for dry / damp / wet locations

5 years warranty (Note.7)

F 110 M M IP65 IP67

Bauart gepruft

Sicherheit

egelma ge

od o s

be wac g

www.tuv.com

ID 2000000000

HVGC-150-350 A

A : IP65 rated. Constant current level can be adjusted through internal potentiometer.

B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance.

D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.

SPECIFICATION

MODEL

HVGC-150-350

HVGC-150-500

HVGC-150-700

HVGC-150-1050

HVGC-150-1400

OUTPUT

RATED CURRENT

350mA

500mA

700mA

1050mA

1400mA

CURRENT ACCURACY

±5.0%

OUTPUT VOLTAGE RANGE Note.4 42 ~ 428V

30 ~ 300V

21 ~ 215V

15 ~ 143V

12 ~ 107V

RATED POWER

149.8W

150W

150.5W

150.15W

149.8W

RIPPLE & NOISE (max.) Note.2 2Vp-p

1.5Vp-p

1Vp-p

0.7Vp-p

0.5Vp-p

CURRENT ADJ. RANGE

Can be adjusted by internal potentiometer A type only

210 ~ 350mA

300 ~ 500mA

420 ~ 700mA

630 ~ 1050mA

840 ~ 1400mA

SETUP, RISE TIME

500ms, 150ms /230Vac 400ms,150ms/347VAC/480VAC at full load ; B type 500ms, 150ms/230Vac 500ms,150ms/347VAC/480Vac at 95% load

HOLD UP TIME (Typ.)

18ms at full load 480VAC / 347VAC

INPUT

VOLTAGE RANGE Note.3 180 ~ 528VAC 254VDC ~ 747VDC

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.95/347VAC, PF≧0.93/480VAC at full load (Please refer to "Power Factor Characteristic" curve)

TOTAL HARMONIC DISTORTION THD<20% when output loading≧50% at 230VAC/277VAC/347VAC input ; THD<20% when output loading≧75% at 480VAC input

EFFICIENCY (Typ.)

91%

91%

91%

90%

90%

AC CURRENT (Typ.)

0.5A / 347VAC 0.38A / 480VAC

INRUSH CURRENT (Typ.)

COLD START 35A(twidth=790μs measured at 50% Ipeak) at 480VAC

MAX. No. of PSUs on 16A

CIRCUIT BREAKER

4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 480VAC

LEAKAGE CURRENT

<0.75mA / 480VAC

SHORT CIRCUIT

Constant current limiting, recovers automatically after fault condition is removed

PROTECTION OVER VOLTAGE

430 ~ 460V

316 ~ 346V

226 ~ 247V

151 ~ 165V

Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery

113 ~ 124V

OVER TEMPERATURE

Shut down o/p voltage, recovers automatically after temperature goes down

WORKING TEMP.

-40 ~ +70℃ (Refer to "Derating Curve")

WORKING HUMIDITY

20 ~ 95% RH non-condensing

ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/℃ (0 ~ 60℃)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY STANDARDS Note.5 UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP65 or IP67 approved

WITHSTAND VOLTAGE

SAFETY &

ISOLATION RESISTANCE

EMC

EMC EMISSION

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

Compliance to EN55015, EN61000-3-2 Class C (≧50% load) ; EN61000-3-3, FCC part 15 class B

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A

MTBF

179.5K hrs min. MIL-HDBK-217F (25℃)

OTHERS DIMENSION

245*68*38.8mm (L*W*H)

PACKING

1.24Kg; 12pcs/15.9Kg/0.78CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf parallel capacitor.

3. Derating may be needed under low input voltages. Please check the static characteristics for more details.

4. Please refer to "DRIVING METHODS OF LED MODULE" and "DIMMING OPERATION".

5. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1.

6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

7. Refer to warranty statement.

8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently

connected to the mains.

File Name:HVGC-150-SPEC 2015-05-26

Share Link: